Schaller Megaswitch M wiring alteration question

[Weekendwarrior]

Hello Forum, I Have successfully wired the schaller mega m in a build based on the schematic attached. I have experience wiring 3-way, 5-way and mini toggles but this was my first super switch and I don’t really understand it so had to follow the schematic exactly for the result. I am happy with configuration but would like to add the bridge slug coil to position 4 which is now just the neck screw coil. I am hoping someone with knowledge of the mega M can advise me on what terminals to jumper together. Thank you

 

[switchman]

Hi it doesn't look possible just by adding a single jumper. Looks like p2 bridge slug is active by grounding the series join via lug J connecting to L while the bridge black hot is connected to output. There's no open terminal to do the same for p4. Probably can be done with a few jumper changes. if no one else has an answer I can look at it more closely tomorrow. i have a Super to Mega pinout key somewhere I can dig out too.

 

[Weekendwarrior]

Hi it doesn't look possible just by adding a single jumper. Looks like p2 bridge slug is active by grounding the series join via lug J connecting to L while the bridge black hot is connected to output. There's no open terminal to do the same for p4. Probably can be done with a few jumper changes. if no one else has an answer I can look at it more closely tomorrow. i have a Super to Mega pinout key somewhere I can dig out too.

Thanks Switchman appreciate the quick reply and I’d be very obliged for your further thoughts or any other member who may know.