Hey all, I've searched through all the schematics and have not been lucky in finding a schematic layout for an Ibanez JEM (with a single coil sized humbucker in the middle) or similar in the schematic list. Is their one in there that I can use, or hidden away in the depths of the SD site that someone here has drawn up?
Schematics for 3 HUM/1 VOL/1 TONE/5 WAY
- Thread starter el bungle
- Start date
Re: Schematics for 3 HUM/1 VOL/1 TONE/5 WAY
basically you need to follow this
http://www.seymourduncan.com/support/schematics/S_3singles1vol1tone1switch.html
but use 500k pots
on stock ibanez they use a single coil in the middle so they split the bucker to get humcancelling in the notch positions. since you are using all buckers, i wouldnt split them.
if you are using duncans the black wires will go to the switch, the bare and ground wires to back of a pot and the red and white should be connected and insulated
basically you need to follow this
http://www.seymourduncan.com/support/schematics/S_3singles1vol1tone1switch.html
but use 500k pots
on stock ibanez they use a single coil in the middle so they split the bucker to get humcancelling in the notch positions. since you are using all buckers, i wouldnt split them.
if you are using duncans the black wires will go to the switch, the bare and ground wires to back of a pot and the red and white should be connected and insulated
