Seymour Duncan Pickups

[slick 848]

Ive got 2 seymour duncan pickups that I want to hook to some push pull pots,where can I find the wire connector from the pickup that has the connector on the end of the wire I already have the male connector on the Push Pull Pots just need the female connector on the end of the pickup wiring,its ok if I half to solder the connector on the wires myself Hope you understand Thanks

 

[jeremy]

welcome to the forum!

you want to wire a female connector to the wires coming off the pickups? youd want whatever is the counterpart to the male connector you already have. got a pic of that?

 

[Mincer]

I've done connectors for the ground and the jack before, but never for push pull pots or on the pickups themselves. Is this so you can swap out pickups easily?

 

[beaubrummels]

Are your Seymour Duncan pickups 3-4 conductor pickups? (Your options are limited if you only have braided single-conductor pickup wires.). What model Duncans are we talking about?

For connectors, Mouser is the most often recommended here. Lots of threads on here about connector model numbers, etc.

 

[GuitarDoc]

The (reliable) connector that you want is called "solder".