Specs of Invader pole pieces?

[Artie]

Re: Specs of Invader pole pieces?

It's 10-32. That means a #10 screw with 32 threads per inch. The thread diameter is .190", which is 4.826 mm.

 

[FernandoDuarte]

Re: Specs of Invader pole pieces?

It's 10-32. That means a #10 screw with 32 threads per inch. The thread diameter is .190", which is 4.826 mm.

Thank you very much!
I guess I'll have to buy from eBay, pretty sure won't find it here down south...

 

[Adieu]

Re: Specs of Invader pole pieces?

Hello, sorry for ressurect an old thread... Does the 10/32 means 8mm diameter of the thread part???
There are some screws in USA that we don't have in Brazil, like "standard set screws" which I don't understand very well too...

SAE/"standard" is American-eeze for INCHES SYSTEM parts (as opposed to metric)

 

[allstarrme]

Re: Specs of Invader pole pieces?

Thank you very much!
I guess I'll have to buy from eBay, pretty sure won't find it here down south...

What are you looking for, The giant cap head screws or the standard non head set screws?

I have bought several sets of regular pole screws straight from DiMarzio as the super distortion uses the same thread and pitch as the invader. They are like $5 a set, maybe more for shipping outside the us. Contact DiMarzio, see what they say. They are the right length and material for the pickup too.

 

[gearhead63]

Re: Specs of Invader pole pieces?

They are 3/16" (.1875") diameter thread. The same diameter as the solid slugs. BE SURE NOT TO USE STAINLESS STEEL SCREWS, SLUGS ETC AS THEY ARE NON-MAGNETIC!
They have to be IRON!