spin-a-split and phase switching?

[korovamilkdud]

Hey homies. Is my wiring gurus up in da hizzy?:afro:

I have a dpdt push-pull pot controlling phase switching. My neck pickup is wired to it. I'd like to wire my neck pickup for spin-a-split control. Can this be done, I'd rather not have to undo any of the work I've already done with the phase switching and all.

http://www.seymourduncan.com/website/support/sum96tip.shtml

http://www.seymourduncan.com/website/support/schematics/phase_switch_humbuckers.html

 

[Chaos]

Re: spin-a-split and phase switching?

If you want to dedicate your neck volume pot to the spin-split function it can be done. Your Bridge volume will then need to be wired as a master volume control.
Or you could give up one tone control for the spin-split and replace the other tone control with a dual concentric pot.

 

[korovamilkdud]

Re: spin-a-split and phase switching?

Okay, I may have not shared enough information. It happens. :smack:

I'll be trying to use my neck tone pot for the split- it is also a dpdt push-pull pot for phase switching. The reason I don't want to use a different pot for the split is because I had to rout the cavity out to get the dpdt to fit properly. I don't need a tone control for my neck at all really, that's why I'm trying to do this.