Spin a split humbucker diagram

[johnabraham]

Looking at this wiring diagram on the site- anyone know what exact humbucker bobbin becomes the single coil? I assume it would be the screw bobbin- and the slug bobbin is the one faded in and out ? Thanks.

 

[Rane]

Re: Spin a split humbucker diagram

I think you can wire it either way.

Humbucker Color Codes:

All Seymour Duncan humbuckers with four-conductor hookup wires incorporate a standard wire color code.

GREEN = start of adjustable/south coil
RED = finish of adjustable/south coil
BLACK = start of stud/north coil
WHITE = finish of stud/north coil

For standard series humbucking operation on a 4-Conductor wired humbucker the White & Red wires are soldered together and taped; Green is ground and Black is Hot Output. The bare wire is always grounded.

 

[johnabraham]

Re: Spin a split humbucker diagram

Thanks...

 

[GuitarDoc]

Re: Spin a split humbucker diagram

Here's the diagram:

http://www.seymourduncan.com/wp-content/uploads/2015/06/1H_1V_1SSPL.jpg

This splits to the slug coil. If you want to split to the screw coil just reverse the green and black wires.