Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

[Funkyard]

I have a Duncan Little 59 in the Bridge and a 59 in the neck with 2 CTS push pull pots for series parallel. I used a guitar electronics wiring diagram but when done all sorts of issues inc grounding, grounding cutting out everything, pickups would work if grounding with fingers but still noise. . I took everything apart to checked the neck pickup wiring and everything worked perfect then double checked eventing and rewired again same problem kind of like reverse power & ground? Don't know if the wiring diagram was correct and Duncan does not have one on their website for 2 hum 1 vol 1 tone 2 push pull series parallel. Any one got another diagram that I can use thanks

 

[Funkyard]

Re: Tele 2 humbucker, 2 push pull pots series parallel wiring PROBLEM!!!

Re: Tele 2 humbucker, 2 push pull pots series parallel wiring PROBLEM!!!

I have a Duncan Little 59 in the Bridge and a 59 in the neck with 2 CTS push pull pots for series parallel. I used a guitar electronics wiring diagram WHEN DONE THE NECK PICKUP WORKS BUT NO TONE CONTROL, VERY LITTLE POWER FROM THE BRIDGE PICKUP AND THE TONE CONTROL WORKS??

 

[Funkyard]

Re: Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

I have fixed the problem forgot Switchcraft toggle post are reversed!

 

[Mincer]

Re: Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

Well, that will do it. How does it sound?