Tele=lil 59 Split=push-push

[rammer69]

OK, i just got the lil 59 (B)for a MIM tele, i dont see a schematic showing the split, i have a p-push 500 pot, that i would like to use, i will leave the neck pup stock for now, will the 500 pot work ok ? anybody got a drawing for this application ? thanks much..... rammer

 

[MikeS]

Re: Tele=lil 59 Split=push-push

No drawing, but solder the red and white to the middle lug of the p/p and ground the bottom lug, leaving the top lug open (this makes the "up" position both coils and the "down" position split).

edit: here ya go. This shows the DPDT part of the switch. Obviously the green and bare go to ground and the black goes to the switch (not the pot as shown in the diagram) in the telecaster.

http://www.seymourduncan.com/support/schematics/2hum_2vol_tone_3way-w-spl.html

 

[rammer69]

Re: Tele=lil 59 Split=push-push

HI MIKE-S , thank you, i will try to hook it up ... do you think a 500k tone pot will work ok with the LIL 59 ? ......... rammer

 

[Kommerzbassist]

Re: Tele=lil 59 Split=push-push

It will definately "work". It could only be a bit too bright maybe... but that's a matter of personal taste.
500k pots are what they recommend for lil humbuckers btw.

 

[rammer69]

Re: Tele=lil 59 Split=push-push

KOMMER , THAT is what i wanted to hear, thanks much .... rammer