Tony Levin's Pedal Board (6.25.2009)

Pink Unicorn Horsey

Megä Pöny Rÿdr
Not sure if anyone saw this from my other thread, so I figured I'd post it for all the gearheads in Amp Central.

I took some close-ups of his pedal board with my iPhone. (This is from his Thursday night show.) It was dark in there, and I had to be quick about it, so it's not the best quality. (Also, I stitched together three separate photos, so it's gonna look a little funky because of that as well.)

Here's the board for his Chapman Stick, which is really two boards in one, since the Stick has two output jacks:

tl_board.jpg


As far as I can tell, the signal path is as follows…

Stick Output 1:

Ernie Ball VP Jr. (tuner out to Peterson Strobostomp) >
Analog Man Bi-CompROSSor >
Electro-Harmonix Stereo Memory Man With Hazarai >
AMT Electronics FT-1 Fatal Tube

Stick Output 2:

Ernie Ball VP Jr. (tuner out to Korg Pitch Black) >
Boss Heavy Metal HM-2 >
Tonebone Radial JX-2 Pro Switchbone

The Switchbone has one output to an Analog Man Beano Boost, while the other one goes to a Boss pedal I can't read. (If you know what the mystery Boss pedal is, let me know.) For most of the pedals, you can probably figure out the knob settings if you look closely enough.

He played into (at a minimum) two Crate amps…seriously, Crate. One of them is a V30. Can't recall what the other is.

- Keith
 
Re: Tony Levin's Pedal Board (6.25.2009)

The mystry Boss pedal is an RV-3 Reverb/Delay...it might be an RV-2 reverb but Im thinking it's the RV-3 Reverb/Delay.

Also worth mentioning, Tony's Beano is custom. It has the LOW setting from a stock beano and 2 settings that go lower...no MID setting and no stock HIGH Rangemaster setting.
 
Back
Top