Hey guys, I am having an issue with my Triple shot ring and AT-1 Dimarzio pickup. I get an out of phase crazy sound in position 2. I've heard others share the same. They say two wires need to be switched, but I'm not sure which ones on the wiring plate of the Triple Shot. Any help, greatly appreciated.
Triple Shot Ring and Dimarzio AT-1 wiring issue?
- Thread starter jasonk931
- Start date
DavidRavenMoon
New member
Triple Shot Ring and Dimarzio AT-1 wiring issue?
To translate the two pickup color codes;
Where the Duncan white wire goes use the DiMarzio black wire.
Duncan green is DiMarzio green
Duncan black is DiMarzio red
Duncan red is DiMarzio white.
Why all the pickup makers use different colors is nuts. DiMarzio did it first so just use that as a standard. EMG HZ also use the DiMarzio colors.
Sent from my iPhone using Tapatalk
To translate the two pickup color codes;
Where the Duncan white wire goes use the DiMarzio black wire.
Duncan green is DiMarzio green
Duncan black is DiMarzio red
Duncan red is DiMarzio white.
Why all the pickup makers use different colors is nuts. DiMarzio did it first so just use that as a standard. EMG HZ also use the DiMarzio colors.
Sent from my iPhone using Tapatalk
Re: Triple Shot Ring and Dimarzio AT-1 wiring issue?
Yes, I checked color codes years ago, but I'm still running into a phase issue on position 2 of 5 way switch. Colors are correct according to charts, but some others have the same issue with Dimarzio Pups and Suhr in 2nd position.
Yes, I checked color codes years ago, but I'm still running into a phase issue on position 2 of 5 way switch. Colors are correct according to charts, but some others have the same issue with Dimarzio Pups and Suhr in 2nd position.
DavidRavenMoon
New member
Re: Triple Shot Ring and Dimarzio AT-1 wiring issue?
You then have to swap the hot and ground leads coming off the triple shot or reverse the polarity of the middle pickup (which I assume matches the neck?). You can also flip the magnet around in the DiMarzio. But they are sometimes glued together.
Sent from my iPhone using Tapatalk
You then have to swap the hot and ground leads coming off the triple shot or reverse the polarity of the middle pickup (which I assume matches the neck?). You can also flip the magnet around in the DiMarzio. But they are sometimes glued together.
Sent from my iPhone using Tapatalk
Similar threads
