trying to find a diagram.

[teddeeh]

hey guys, i am building a guitar at the moment and cant find any schematics out there for a 2 humbucker guitar, 1 push pull vol, with the push pull being pup selector. could anyone help? or if any genius can sort it out meebe design the schematic for me? if the style, if possible, of SD's support wiring diagrams.

to get a little specific, ideally i would like to have the pulled out being the neck and pushed in being the bridge. pups, jb for bridge and a vintage rails for the neck.

 

[MikeS]

Re: trying to find a diagram.

That's the George Lynch scheme:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=gl_style

New style VRn or old style? Old style was 2 conductor and was factory wired in parallel, new style is 4 conductor. If it's 4 conductor just wire it up like the bridge humbucker... taping red & white together and soldering the green to ground and black to the push pull for series operation of the VRn.

 

[teddeeh]

Re: trying to find a diagram.

new style. dude that you so much. thats really cool. again, thanks very much dude.

 

[MikeS]

Re: trying to find a diagram.

You're welcome.

I failed to mention that traditional operation of the VR was in parallel. If you want to do that then wire black and red to the push/pull and green/white to ground. There should have been a booklet in the box that explains how to wire a VR in both series and parallel.