What is on your pedal board?
- Thread starter gripweed
- Start date
Nite_Maresz_25
on Elm Streetologist
Re: What is on your pedal board?
my pedals are on the floor, but its whats in my sig. except the de7 isnt in the signal chain anymore
my pedals are on the floor, but its whats in my sig. except the de7 isnt in the signal chain anymore
some_dude
Raging BB Gunologist
Re: What is on your pedal board?
Dunlop Wylde Wah or Chicago Iron Parawah* ->
Ernie Ball Volume ->
Proco Rat2 ->
UniVibe controller (the UniVibe's mounted on a rack shelf with the delays) ->
* Switching back and forth between the wahs...trying to decide which I like better.
in loop.....
Boss DD-3**....
DD-3 dry out -> Boss DD-20 (long delays) -> Power amp channel A
DD-3 wet out -> EHX Memory Man (short delays) -> Power amp chanel B
** The DD-3 is used for splitting the signal. It's also used for short delays when I'm using the Memory Man for it's chorus mode.
screamingdaisy said:
Dunlop Wylde Wah or Chicago Iron Parawah* ->
Ernie Ball Volume ->
Proco Rat2 ->
UniVibe controller (the UniVibe's mounted on a rack shelf with the delays) ->
* Switching back and forth between the wahs...trying to decide which I like better.
in loop.....
Boss DD-3**....
DD-3 dry out -> Boss DD-20 (long delays) -> Power amp channel A
DD-3 wet out -> EHX Memory Man (short delays) -> Power amp chanel B
** The DD-3 is used for splitting the signal. It's also used for short delays when I'm using the Memory Man for it's chorus mode.
Gearjoneser
Gear Ho
Re: What is on your pedal board?
I got my dual loop box from pedalboard/com, but I don't know if they're around anymore. and I love keeping the Line 6's on it, so I can set combinations of the blue and green L6's and bring them in/out of the loop with one button in front. That way, I don't have to step deep into the board. I just deal with 1 FX button, the amp switch, and OD switch. It doesn't even look like I'm tap dancing, and I can access all the sounds easily. The 2nd button on the loop box kills my signal and sends it to the tuner.
I got my dual loop box from pedalboard/com, but I don't know if they're around anymore. and I love keeping the Line 6's on it, so I can set combinations of the blue and green L6's and bring them in/out of the loop with one button in front. That way, I don't have to step deep into the board. I just deal with 1 FX button, the amp switch, and OD switch. It doesn't even look like I'm tap dancing, and I can access all the sounds easily. The 2nd button on the loop box kills my signal and sends it to the tuner.
XSSIVE
OCDologist
Re: What is on your pedal board?
uh oh, you have me worried...will i be ok with mine? i am using it just to bypass my pedals, the ones in the loop and the ones in front of the amp. there are 3 buttons one for the FX in the loop on/off, one for the FX in front of the amp on/off, and the third is a master bypass to go from guitar direct to amp and bypass all the pedals.
-Mike
aleclee said:
uh oh, you have me worried...will i be ok with mine? i am using it just to bypass my pedals, the ones in the loop and the ones in front of the amp. there are 3 buttons one for the FX in the loop on/off, one for the FX in front of the amp on/off, and the third is a master bypass to go from guitar direct to amp and bypass all the pedals.
-Mike
G
Guest
Guest
Re: What is on your pedal board?
The Marshall channel switcher is for the amps tremolo.
GUITAR -> Dunlop JH-1 Wahwah -> Ibanez ts808 Reissue -> AMP
I the box part of the pedalboard are the wire hassels incl. the other 3 power connectors from the Visual Sound 1-Spot.
I use a "normal" cable between the pedalboard and the guitar. Then George L's cabels between the pedals and to the amp.
I have room for one more pedal, but I haven't decided what I need yet:laugh2:
The Marshall channel switcher is for the amps tremolo.
GUITAR -> Dunlop JH-1 Wahwah -> Ibanez ts808 Reissue -> AMP
I the box part of the pedalboard are the wire hassels incl. the other 3 power connectors from the Visual Sound 1-Spot.
I use a "normal" cable between the pedalboard and the guitar. Then George L's cabels between the pedals and to the amp.
I have room for one more pedal, but I haven't decided what I need yet:laugh2:
Brow
Active member
Re: What is on your pedal board?
This is what pedals I own, although I don't use anywhere near all of them at the same time
Z-Vex Super Duper 2-in-1
Fulltone Fulldrive 2
Fulltone Fat Boost
EMMA Electronics ReezaFRATzitz
G2D Custom Overdrive
Modified Ibanez TS9 Tubescreamer
Modified Vox Wah
Seymour Duncan Pickup Booster
Boss TU2 Pedal Tuner
Boss SD1 Super Overdrive
EH Big Muff Fuzz
Boss CE5 Chorus Ensemble
Boss GE7 7 Band EQ
Ibanez/Maxon PhaseTone Phaser
Ibanez DE7 Delay/Echo
When I finally get a pedalboard made it will consist of:
Modded Vox wah--BOSS TU2 tuner (as power supply)--Fulltone Fat Boost--Fulltone Full Drive/G2D Custom Overdrive--Modded Ibanez Tube Screamer--EMMA ReezaFRATzitz--ZVex Super Duper 2in1
Although in my current band, my rig consists of Strat (with EMG Afterburner Booster)--Orange AD30 head and Marshall JTM60 combo as a speaker cab
Craig
This is what pedals I own, although I don't use anywhere near all of them at the same time
Z-Vex Super Duper 2-in-1
Fulltone Fulldrive 2
Fulltone Fat Boost
EMMA Electronics ReezaFRATzitz
G2D Custom Overdrive
Modified Ibanez TS9 Tubescreamer
Modified Vox Wah
Seymour Duncan Pickup Booster
Boss TU2 Pedal Tuner
Boss SD1 Super Overdrive
EH Big Muff Fuzz
Boss CE5 Chorus Ensemble
Boss GE7 7 Band EQ
Ibanez/Maxon PhaseTone Phaser
Ibanez DE7 Delay/Echo
When I finally get a pedalboard made it will consist of:
Modded Vox wah--BOSS TU2 tuner (as power supply)--Fulltone Fat Boost--Fulltone Full Drive/G2D Custom Overdrive--Modded Ibanez Tube Screamer--EMMA ReezaFRATzitz--ZVex Super Duper 2in1
Although in my current band, my rig consists of Strat (with EMG Afterburner Booster)--Orange AD30 head and Marshall JTM60 combo as a speaker cab
Craig
CapoFirstFret
New member
Re: What is on your pedal board?
alright well my pedalboard goes through many incarnations, but the current one that I'll be using tonight....
VHT Valvulator I ->
Ernie Ball Mono Volume, Teese McCoy Wizard Wah, Spina TS9, Boss DS-1, Rocktron Short Timer, Boss TU-2 Tuner
alright well my pedalboard goes through many incarnations, but the current one that I'll be using tonight....
VHT Valvulator I ->
Ernie Ball Mono Volume, Teese McCoy Wizard Wah, Spina TS9, Boss DS-1, Rocktron Short Timer, Boss TU-2 Tuner
some_dude
Raging BB Gunologist
Re: What is on your pedal board?
It has slightly less vocal range and a fazel inductor. The rubber things on the toe are better designed (they stop the pedal before it hits the on/off button, but crush better for when you want to hit it). It's definatly focused for high gain use and isn't as good for low gain "wahka whaka" stuff.
As for the voicing...I'd have to A/B them as I've never used the Hendrix model.
ErikH said:
It has slightly less vocal range and a fazel inductor. The rubber things on the toe are better designed (they stop the pedal before it hits the on/off button, but crush better for when you want to hit it). It's definatly focused for high gain use and isn't as good for low gain "wahka whaka" stuff.
As for the voicing...I'd have to A/B them as I've never used the Hendrix model.
metallicajs1
New member
Re: What is on your pedal board?
Boss MT-2 and Boss NS-2
Boss MT-2 and Boss NS-2
Pink Unicorn Horsey
Megä Pöny Rÿdr
Re: What is on your pedal board?
Hey Mike,
Did you ever get your Loooper pedal? If so, how is it? If not, what's the status?
- Keith
XSSIVE said:
Hey Mike,
Did you ever get your Loooper pedal? If so, how is it? If not, what's the status?
- Keith
Pink Unicorn Horsey
Megä Pöny Rÿdr
Re: What is on your pedal board?
Time for an update…
Time for an update…
ImmortalSix
John Mayer's Mankini
ErikH
Well-known member
Re: What is on your pedal board?
Nothing. I don't have a pedalboard. Amp channel switcher on the floor and that's it. I may start using my wah again here and there though, but that is all.
Nothing. I don't have a pedalboard. Amp channel switcher on the floor and that's it. I may start using my wah again here and there though, but that is all.
