What's the decimal equivalent of 1 5/8ths and 1 11/16's?

Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

Every fabrication shop, whether for guitars or machinery builds to tolerances that they find acceptable. I suspect that rounding the metric sizes is as close to specs as they can build them.

Probably. It just made me wonder... Since I haven't had calipers in hand with most of the guitars I've had my hands on, but I know some people are into measuring everything. :)
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

The actual measurements aren't all that important. What it amounts to is if you like the feel and it works well, that's what matters.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

The actual measurements aren't all that important. What it amounts to is if you like the feel and it works well, that's what matters.
True. This much I can tell you, though... I tend not to like anything larger than 42mm. I definitely don't like Gibson's new 1-3/4" nuts for the 2015 models.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

Gibson has gone to 1 3/4"? Wow, talk about going in the opposite direction.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

Gibson has gone to 1 3/4"? Wow, talk about going in the opposite direction.
On another forum I belong to (blasphemy, right?) our theory is that they had the nuts manufactured and then realized that they were too wide so they just widened the neck carve rather than remanufacture the nuts. Honestly, I see that adjustable brass nut with a zero fret as a potential point of failure, anyway.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

An brief reading selection from:
Herbert West—Reanimator
By H. P. Lovecraft



It was West who first noticed the falling plaster on that part of the wall where the ancient tomb masonry had been covered up. I was going to run, but he stopped me. Then I saw a small black aperture, felt a ghoulish wind of ice, and smelled the charnel bowels of a putrescent earth. There was no sound, but just then the electric lights went out and I saw outlined against some phosphorescence of the nether world a horde of silent toiling things which only insanity—or worse—could create. Their outlines were human, semi-human, fractionally human, and not human at all—the horde was grotesquely heterogeneous. They were removing the stones quietly, one by one, from the centuried wall. And then, as the breach became large enough, they came out into the laboratory in single file; led by a stalking thing with a beautiful head made of wax. A sort of mad-eyed monstrosity behind the leader seized on Herbert West. West did not resist or utter a sound. Then they all sprang at him and tore him to pieces before my eyes, bearing the fragments away into that subterranean vault of fabulous abominations. West’s head was carried off by the wax-headed leader, who wore a Canadian officer’s uniform. As it disappeared I saw that the blue eyes behind the spectacles were hideously blazing with their first touch of frantic, visible emotion.


Servants found me unconscious in the morning. West was gone. The incinerator contained only unidentifiable ashes. Detectives have questioned me, but what can I say? The Sefton tragedy they will not connect with West; not that, nor the men with the box, whose existence they deny. I told them of the vault, and they pointed to the unbroken plaster wall and laughed. So I told them no more. They imply that I am a madman or a murderer—probably I am mad. But I might not be mad if those accursed tomb-legions had not been so silent.

And the point is?......
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

On another forum I belong to (blasphemy, right?) our theory is that they had the nuts manufactured and then realized that they were too wide so they just widened the neck carve rather than remanufacture the nuts. Honestly, I see that adjustable brass nut with a zero fret as a potential point of failure, anyway.

LOL


I'll say this, if you guys can't figure decimals from fractions there is no hope for the future.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

If you've got a calculator you don't need any internet conversion tables. It's about the simplest math you can do besides 2+2=4.

1 5/8" = 8/8 + 5/8 = 13/8". Now just divide 13 by 8! = 1.6250".
1 11/16" = 16/16 + 11/16 = 27/16". = 1.6875".

There are 25.4mm/inch. Therefore, 1.6250" x 25.4mm/in. = 41.2750 mm.
1.6875 in. x 25.4mm/in. = 42.8625 mm.

If you want to go back to inches from mm just divide by 25.4 mm/in.
So, 41.2750 mm divided by 25.4 mm/in = 1.6250".

The only number you ever have to remember is 25.4 mm/in. The rest is just simple math. (Assuming of course that you graduated from 6th grade).
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

LOL


I'll say this, if you guys can't figure decimals from fractions there is no hope for the future.
I used to be able to do it in my head...

Then I went to college and had intelligence beaten out of me.

Oh, the irony.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

The only number you ever have to remember is 25.4 mm/in. The rest is just simple math. (Assuming of course that you graduated from 6th grade).
Remember, there was a whole generation confused by that "new math". I know people from that generation who still can't do simple addition and subtraction.
 
Re: What's the decimal equivalent of 1 5/8ths and 1 11/16's?

Remember, there was a whole generation confused by that "new math". I know people from that generation who still can't do simple addition and subtraction.
There's a whole topic there regarding how math is taught now that I could start but is actually forbidden by the forum rules... :cop:
 
Back
Top