where can i get pickup magnets,bobbins,wire

W

walters

New member
1954 to 1967 Fender Stratocaster Pickup Specs Year Ohms Wire OD Insulation Turns WD MP Wound
1954 5.76k .0030" Formvar 7956 TL/TG North Hand
1955 5.89k .0029" Formvar 7844 TL/TG North Hand
1956 5.98k .0029" Formvar 8012 TL/TG North Hand
1957 6.02k .0029" Formvar 8105 TL/TG North Hand
1958 6.20k .0028" Formvar 8350 TL/TG North Hand
1959 5.95k .0030" Formvar 7925 TL/TG North Hand
1960 6.33k .0028" Formvar 8293 TL/TG South Hand
1961 6.19k .0029" Formvar 8119 TL/TG South Hand
1962 6.22k .0028" Formvar 8220 TL/TG South Hand
1963 6.37k .0028" Formvar 8319 TL/TG South Hand
1964 6.25k .0027" Formvar/Enamel 7980 TL/TG South Hand
January 4, 1965, CBS bought Fender Musical Instruments.
1965 5.80k .0026" Plain Enamel 7626 TL/TG South Machine
1966 5.76k .0026" Plain Enamel 7630 TL/TG South Machine
1967 5.88k .0027" Plain Enamel 7656 TL/TG South Machine
Year Ohms Wire OD Insulation Turns WD MP Wound

Who makes or where can i get .0026, .0027, .0028, .0029, .0030 Formvar or Enamel pickup wire ?

All i see is 42-AWG (American Wire Gauge) and 43-gauge wire
 
Re: where can i get pickup magnets,bobbins,wire

Where can i get and who makes Alnico V pole pieces and magetics for fender tele and strat pickups please?

Single-coil Alnico V Magnet
0.195" diameter x 0.630" long
0.195" diameter x 0.650" long
0.195" diameter x 0.671" long
0.195" diameter x 0.688" long
0.195" diameter x 0.710" long
Vintage staggered polepieces Item Length Number required and location
0.650" 1 required: "B" string
0.671" 3 required: "E" (bass), "A", and "E" (treble) strings
0.710" 2 required: "D" and "G" strings '
70s flush polepieces Item Length Number required and location
0.671" 6 required: All six strings For Tele pickups
Tele Bridge pickup, staggered polepieces Item Length Number required and location
0.630" 4 required: "E" (bass), "A", "B", and "E" (treble) strings
0.688" 2 required: "D" and "G" strings
Tele Neck pickup It
0.630" 6 required: All six strings
 
Re: where can i get pickup magnets,bobbins,wire

Do u guys know where i can find the information on this books or internet sites?
 
Re: where can i get pickup magnets,bobbins,wire

Note also that you're comparing measurements in inches to AWG. The formula for conversion is:

awg_formula.png


Thats "92" raised to the power of the expression in paranthesis.

So 42 AWG = .0025" and 43 AWG = .0022"
 
Re: where can i get pickup magnets,bobbins,wire

Thanks alot guys for the help

So no one make these sizes .0026, .0027, .0028, .0029, .0030 Formvar or Enamel pickup wire ?

So 42 AWG = .0025" and 43 AWG = .0022"

I don't get it fender never used .0025" and .0022" in the 50's or 60's with tele's or strats

So how would u even get the wire to even wind the pickup for relicing or reissue them?
 
You must log in or register to reply here.

Similar threads

L
Cool Pickup Fact Sheet from Seymour:
Replies
12
Views
5K
Jag513
Jag513
Back
Top