Will this work?

[68 lost souls]

Hey,

I was on a local engineering shop and was just wondering if this switch http://www.radionics.ie/cgi-bin/bv/...etscape&3301763812=3301763812&stockNo=1990904 would work for a neck on switch? Also should I get on-on or on-off-on or what?

 

[ErikH]

Re: Will this work?

Link no workee. :yell: You can use a SPST (on-off), SPDT (on-none-on), or 1/2 of a DPDT (on-none-on). See here: http://www.guitarnuts.com/wiring/allpickups.php

 

[68 lost souls]

Re: Will this work?

Sorry try this http://www.radionics.ie/cgi-bin/bv/...etscape&3301770243=3301770243&stockNo=1990904

You may have to be logged on.

Heres the tech specs:

Contact rating 3A @ 250V a.c.
6A @ 125V a.c.
4A @ 30V d.c.
Contact resistance 10mΩ max.
Insulation resistance 1000MΩ @ 500V d.c..
Dielectric strength 1500VRMS
Contact material Silver
Mechanical life 100,000 min
Operating temperature -20°C to + 80°C




106 D on-on RoHS Compliant 199-0881 € 4,24 € 3,83
106 E on-off-on RoHS Compliant 199-0897 € 6,04 € 5,45
106 F (on)-on RoHS Compliant 199-0904 € 6,04 € 5,45
106 G (on)-off-(on) RoHS Compliant 199-0910 € 6,00 € 5,42
106 H (on)-off-on RoHS Compliant 199-0926 € 6,00 € 5,42
= RoHS Compliant

 

[ErikH]

Re: Will this work?

Yup, you gotta be logged on.

That one will be fine. Just got by what one you want now of the 3 choices in my previous post and you're good to go. If you don't want to drill a hole in the pickguard, get a push/pull pot and wire up the neck-on to it.

 

[68 lost souls]

Re: Will this work?

Thanks, I think I do want to drill a hole cause Im trying to get better at modding and building so the more work the better.