Wire diagram needed

[Chrisl1981]

Hi all,

I’ve recently “customised” aka f*cked up my Stratocaster and need a little help with the wiring.

I now have 2 pickups. 1 stacked P90 in the bridge and a stacked vintage single coil in the neck position.

1 tone and 1 volume with a 3 way blade switch. I have x2 250k pots ( tone and volume ) and the volume is a Seymour Duncan liberator system.

can anyone point me to a wiring diagram best suited for this and also advise whether 500k would be better?

Thank you!

 

[beaubrummels]

Welcome to the forum

Liberator with stacks shouldn't be different than humbuckers, except the stacks are 3-conductor (really 4 wires)*, in which case I believe it's white is hot, black+bare is ground and red is series link/not used if not doing splits?

Liberator wiring
https://www.seymourduncan.com/images...H_3G_1V_1T.jpg

For a blade switch, you'll have to do your own translation of the wires. None of the Liberator diagrams have a blade switch.
http://tonetastic.info/library/photo...n-88-49295.jpg

* 3-conductor (4 wires) stack diagram I can find:
https://data2.manualslib.com/first-i...stack-plus.jpg

 

[Chrisl1981]

Thank you so much!

Perfect.