Wiring diagram help please,

[peedenmark7]

New to the forum ,happy to be here, but also need a little help.

I am wiring up a modified strat and am having some troubles getting what I want.

The guitar has a lil screamin demon in the bridge along with 2 SSL-1 single coils.

The guitars as it sits has a Dm-50, 5 way slide, volume and 2 tones.
I am installing a Dimarzio push/pull pot to tap the demon in the volume position and cant for the life of me remember how to wire it in.

I am also having an issue where the middle tone has now become a volume and the bridge tone does not function with the bridge pickup alone.

I do not see any diagrams on the Seymour site for this set up.

Can anyone help me out ?

Thanks !!

 

[GuitarDoc]

Re: Wiring diagram help please,

This one should give you what you want:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_split

 

[peedenmark7]

Re: Wiring diagram help please,

Just found that diagram and thanks ! I have it hooked up identically, checked it 3 times and its dead on..

I have the coil tap functioning now, but I am only getting a master tone out of it..
the middle tone is acting like a volume control and the lower one is acting like a master


This is for a friend and to compound things, the solder work was a mess so I de-soldered everything to start as fresh as i could.. The Dm50 is used and who knows how old the pots are..
I sprayed everything out.. just having fits on this one for some reason.
What is wrong ?

 

[GuitarDoc]

Re: Wiring diagram help please,

If you have the tone control in parallel with the volume pot via the switch, it can't act like a vol control. Check your wiring again.

Also, it would be helpful if we could see what's going on with your wiring. Take some pics (good quality closeups so we can see the wires and connections in detail).