Wiring Diagram / Help

[CTG805]

Hello all,

I'm looking to put in a Dimebucker into the bridge of my guitar. I will be removing the neck pickup and tone knob and would ideally like to keep my 3 way pickup selector as a psuedo-killswitch.

So my components include: 1 HUM / 1 VOL / 3-WAY TOGGLE -- Would it be possible to run this configuration?

Any info or resources are greatly appreciated!

Best,

Curt

 

[jeremy]

Re: Wiring Diagram / Help

sure and pretty simple too. run the pup to the switch, then switch to volume, then to the jack. if you look at the duncan wiring diagrams they should show you all you need to know

 

[CTG805]

Re: Wiring Diagram / Help

sure and pretty simple too. run the pup to the switch, then switch to volume, then to the jack. if you look at the duncan wiring diagrams they should show you all you need to know

Thanks for the quick reply -- I took a second look on their website and was able to find this Google Doc: https://docs.google.com/gview?embed...om/wp-content/uploads/2016/05/1H_1V_mtSSP.pdf.

I am not sure what the difference between the series/split/parallel wirings since my toggle is a 3-way selector.