spacemonkey77
New member
I am hoping some of you may know where I can find two different wiring diagrams.
I posted a thread several days ago about my guitar at : https://forum.seymourduncan.com/showthread.php?257927-Question-on-Seymour-Duncan-wiring-for-my-strat
Thanks so much for all the help i got there. It was greatly appreciated. I hope that making a new thread looking for these wiring diagrams is ok.
Since then I have been considering two different options I was hoping you all could help with. The first plays off my current setup (which would not require me to buy anything else.... which is HSH, 1 volume, 1 tone, 5 way switch, 2 way mini toggle (for coil splitting) (The pickups for the HSH = SH-8 Invader in bridge, SVR-1 middle, and SHR-1 neck.) Does anyone know of a wiring diagram for this settup. I have been unable to find one on the Seymore Duncan site or the web.
My other option would be to do away with the 2 way mini toggle and add a push pull instead. That would free up a hole in my pick guard that I could presumably replace with a second tone pot. My Thinking would be for one tone to control the neck and middle and the other for the bridge, but im open to other ideas/suggestions.
So for this, does anyone know of a wiring diagram for HSH, 1 Volume, 2 Tone, 5 way switch, Push/Pull (The pickups for the HSH would be the same as above = SH-8 Invader in bridge, SVR-1 middle, and SHR-1 neck.)
As posted before in the other thread, here is what im working with right now. I do realize there are some mistakes in the wiring from the photo. I have some phasing issues between the humbucker and middle fender pickup, but that fender pickup will be replaced with a vintage rail. I also have the hot rail wired in series and will prob switch it to parallel as suggested in the previous thread.
The Reason I am looking for wiring diagrams is because I am a visual person, and know there are mistakes in the current wiring, so i would like to have the diagrams to try and see where My mistakes are for the original scheme and to see how to wire the alternate scheme.
Thanks a million to anyone who can point me in the right direction.
Ryan
I posted a thread several days ago about my guitar at : https://forum.seymourduncan.com/showthread.php?257927-Question-on-Seymour-Duncan-wiring-for-my-strat
Thanks so much for all the help i got there. It was greatly appreciated. I hope that making a new thread looking for these wiring diagrams is ok.
Since then I have been considering two different options I was hoping you all could help with. The first plays off my current setup (which would not require me to buy anything else.... which is HSH, 1 volume, 1 tone, 5 way switch, 2 way mini toggle (for coil splitting) (The pickups for the HSH = SH-8 Invader in bridge, SVR-1 middle, and SHR-1 neck.) Does anyone know of a wiring diagram for this settup. I have been unable to find one on the Seymore Duncan site or the web.
My other option would be to do away with the 2 way mini toggle and add a push pull instead. That would free up a hole in my pick guard that I could presumably replace with a second tone pot. My Thinking would be for one tone to control the neck and middle and the other for the bridge, but im open to other ideas/suggestions.
So for this, does anyone know of a wiring diagram for HSH, 1 Volume, 2 Tone, 5 way switch, Push/Pull (The pickups for the HSH would be the same as above = SH-8 Invader in bridge, SVR-1 middle, and SHR-1 neck.)
As posted before in the other thread, here is what im working with right now. I do realize there are some mistakes in the wiring from the photo. I have some phasing issues between the humbucker and middle fender pickup, but that fender pickup will be replaced with a vintage rail. I also have the hot rail wired in series and will prob switch it to parallel as suggested in the previous thread.
The Reason I am looking for wiring diagrams is because I am a visual person, and know there are mistakes in the current wiring, so i would like to have the diagrams to try and see where My mistakes are for the original scheme and to see how to wire the alternate scheme.
Thanks a million to anyone who can point me in the right direction.
Ryan
