Wiring Question

[infernoride]

Well ai have a Quiestion about wiring, I have a sh-6 bridge humbucker and a classic live wire single on the middle pos also and paf Joe on the neck, an a 5 way switch, i want to hace the original 5 factory sounds, but aldo the following bridge series/spli/parrallel/ phase
neck on
neck series/spli/parrallel/

I bought:
2 on/on/on dpdt switches for the series/spli/parrallel/
2 on/on dpdt switches for the neck on and bridge switches

I've already wired up thsi ones but my problem is how to get the factory sounds how do i connects the +'s and -'s in the 5 way switch? any one

anyway this is my mail If some one wants the schematic i have so far.

 

[Artie]

Re: Wiring Question

Take a look at this diagram: Series/split/parallel

That will take care of the series/split/parallel and phase functions of one pup. Now, simply use that one single black wire thats on the far right to go to the 5-way switch of a typical Strat wiring diagram. Like this:

http://www.seymourduncan.com/support/schematics/S_3singles1vol1tone1switch.html

I think that covers what you're looking for.

Artie

 

[infernoride]

Re: Wiring Question

ok thanks for that, willl this give the (bridge north-middle pos?) and the (middle- neck south?)