Originally posted by Top-L
View Post
Announcement
Collapse
No announcement yet.
You have $2000 for guitar(s). Do you buy one $2000 guitar, or....
Collapse
X
-
I'd buy 3 $500 guitars, and then deck them out with pickups and knobs and straps etc.Go buy my book. https://www.amazon.com/dp/198405564X
Comment
-
-
I'm not spending over $1000 on a guitar anymore.
I always wanted a US made Fender Stratocaster and at 44 years old I finally bought one from sweetwater this May. It's an American Professional model and at $1449.99 + tax, it was extremely underwhelming.
The finish was subpar, pickups were flat, and it needed a new nut out of the box (the b string slot was cut to low). Plus I needed to add quality of life features like new pickups, modern saddles, different color pickguard/plastic parts, and locking tuners. (FYI The hard case is amazing so I guess thats a plus)
So I've put about $1900 into a strat I could have pieced together and made exactly the way I wanted for about $1000.
The last $2000 Gibson I bought was extremely disappointing quality control wise also, so I just done. I'm done spending over $1000 on guitars.
In the future, at least if there is a quality control issue, it will be my fault and I didn't over pay for it.
Originally posted by Lucid_LunaticIf you think an Epi is as good as a Gibson, you're probablly not old enough to find the clit yet.
Comment
-
For $2000...
Used Reverend Buckshot $550
Used Fender Hot Rod Deluxe $400
Used array of pedals:- Voodoo Labs Micro-Vibe ($75 used at Guitar Center)
- MXR Phase 90 ($50 used at Guitar Center)
- JHS Bonsai ($175 on Reverb)
- JHS PG-14 ($150 on Reverb)
- Catlalainbread Calisto Chorus ($160 on Reverb)
- Supro Analog Delay ($170 on Reverb)
- Catalainbread Topanga Spring Reverb ($160 on Reverb)
- JHS Prestige Boost ($100 on Reverb)
Comment
-
Originally posted by Wonker View PostI'm not spending over $1000 on a guitar anymore.
I always wanted a US made Fender Stratocaster and at 44 years old I finally bought one from sweetwater this May. It's an American Professional model and at $1449.99 + tax, it was extremely underwhelming.
The finish was subpar, pickups were flat, and it needed a new nut out of the box (the b string slot was cut to low). Plus I needed to add quality of life features like new pickups, modern saddles, different color pickguard/plastic parts, and locking tuners. (FYI The hard case is amazing so I guess thats a plus)
So I've put about $1900 into a strat I could have pieced together and made exactly the way I wanted for about $1000.
The last $2000 Gibson I bought was extremely disappointing quality control wise also, so I just done. I'm done spending over $1000 on guitars.
In the future, at least if there is a quality control issue, it will be my fault and I didn't over pay for it.
It seems like 1500 these days is just a 500 guitar with lots of marketing and pretty features.
Comment
-
Late to the party, but like many, I'd buy myself an used Ernie Ball Music Man for under $2K and keep the change. The SS frets, neck carve, and oil/wax finish allows the guitar to play effortless. Bends are like silk. Living in a studio apartment, I don't need quantity, but would prefer quality w/ specific specs.
Sent from my SM-G973U using Tapatalk
Comment
-
Originally posted by Wonker View PostI'm not spending over $1000 on a guitar anymore.
I always wanted a US made Fender Stratocaster and at 44 years old I finally bought one from sweetwater this May. It's an American Professional model and at $1449.99 + tax, it was extremely underwhelming.
The finish was subpar, pickups were flat, and it needed a new nut out of the box (the b string slot was cut to low). Plus I needed to add quality of life features like new pickups, modern saddles, different color pickguard/plastic parts, and locking tuners. (FYI The hard case is amazing so I guess thats a plus)
So I've put about $1900 into a strat I could have pieced together and made exactly the way I wanted for about $1000.
The last $2000 Gibson I bought was extremely disappointing quality control wise also, so I just done. I'm done spending over $1000 on guitars.
In the future, at least if there is a quality control issue, it will be my fault and I didn't over pay for it.
To each their own...
Comment
-
Originally posted by devastone View PostWhen did EBMM start using SS frets? I was looking at some Axes (Axii?).
I don't know when it started, but it honestly depends on the model. Some of the cutlass, valentine, and stingray models carry the SS frets (I believe they have SS and non SS on some). The artists models such as the John Petrucci, Saint Vincent, Jason Richardson, and Dustin Kensure carry them too.
I want to say most Ball Family Reserve (limited release) models have SS frets. My Cutlass is a BFR model. The fretwork on this neck is the best I've seen or owned from a production line. EBMM prides themselves in outstanding neck construction. No one seems to like the Cutlass shape, but everyone forgets it was designed by Leo.
Sent from my SM-G973U using Tapatalk
Last edited by YeRedHouseOverYonder; 07-29-2020, 12:17 PM.
Comment
-
Originally posted by YeRedHouseOverYonder View PostIt honestly depends on the model. Some of the cutlass, valentine, and stingray models carry the SS frets (I believe they have SS and non SS on some). The artists models such as the John Petrucci, Saint Vincent, Jason Richardson, and Dustin Kensure carry them too.
I want to say most Ball Family Reserve (limited release) models have SS frets. My Cutlass is a BFR model. The fretwork on this neck is the best I've seen or owned from a production line. EBMM prides themselves in outstanding neck construction. No one seems to like the Cutlass shape, but everyone forgets it was designed by Leo.
Sent from my SM-G973U using Tapatalk
Sadly, as a singlecut slut, I have never tried an EBMM guitar and I likely never will. However, I do not doubt they are fine, premium instruments, just like their basses.
- Likes 1
Comment
-
Originally posted by SnakeAces View Post
I am a huge fan of EBMM Stingray basses. Some of the best production line basses I have ever heard, played or seen.
And much like you, EBMM guitars were never on my scope until I was looking for a quality made strat that wasn't $2000+. I refuse to pay that much for a CNC'd strat. I'm seeing custom shop strats go for $3800-5000 depending on relic or finish. So, I found my BFR for $1750 shipped and being a limited release of 49 guitars, it'll likely retain most of its value. From someone who loves the playability and tone from the EBMM basses, the production quality translates to their guitars for sure \m/
Sent from my SM-G973U using Tapatalk
Comment
-
Originally posted by YeRedHouseOverYonder View Post
Dude! I made the mistake in 2005 of not buying a EBMM stingray bass. I did not want to wait 3 months to get a brand new model versus heavily played floor models at GC. I was 16 years and had sold bottles/cans for 6+ months. I ended up with a MIA Fender Jazz Bass that was lack uster. A EBMM Stingray 5 is still a dream bass of mine. Its a monster tone through a SVT-3 Pro.
And much like you, EBMM guitars were never on my scope until I was looking for a quality made strat that wasn't $2000+. I refuse to pay that much for a CNC'd strat. I'm seeing custom shop strats go for $3800-5000 depending on relic or finish. So, I found my BFR for $1750 shipped and being a limited release of 49 guitars, it'll likely retain most of its value. From someone who loves the playability and tone from the EBMM basses, the production quality translates to their guitars for sure \m/
Sent from my SM-G973U using Tapatalk
I am sure I would love an EBMM guitar if I played it. Maybe I will have to check one out someday. I do not mind CNC precision on guitars, but obviously well-crafted handmade instruments are extremely special. The orpheo LP bass will be my first handmade instrument. I have played many that I love, but this will be my first in my own collection. I look forward to it very much. However, I do not mind my CNC Warmoth Regals at all. Those guitars are legit, SS frets, the neck profile I prefer, different woods to play around with, etc.
Anyway, I will stop to play an EBMM guitar the next time I see one for sure.Last edited by Snake Aces; 07-30-2020, 02:14 AM.
Comment
-
Originally posted by YeRedHouseOverYonder View Post
Dude! I made the mistake in 2005 of not buying a EBMM stingray bass. I did not want to wait 3 months to get a brand new model versus heavily played floor models at GC. I was 16 years and had sold bottles/cans for 6+ months. I ended up with a MIA Fender Jazz Bass that was lack uster. A EBMM Stingray 5 is still a dream bass of mine. Its a monster tone through a SVT-3 Pro.
And much like you, EBMM guitars were never on my scope until I was looking for a quality made strat that wasn't $2000+. I refuse to pay that much for a CNC'd strat. I'm seeing custom shop strats go for $3800-5000 depending on relic or finish. So, I found my BFR for $1750 shipped and being a limited release of 49 guitars, it'll likely retain most of its value. From someone who loves the playability and tone from the EBMM basses, the production quality translates to their guitars for sure \m/
Sent from my SM-G973U using Tapatalk
Comment
Comment