I am trying to wire an Ibanez s-series and the 5-way switch has 8 prongs to solder to and the only diagram in the diagrams section of this site shows a 5-way switch with 6 solder points. The humbucker I took out has a white wire soldered to the very end position and a red wire soldered to the 4th prong. (note: the switch does not have anything wired to the 1st or 3rd prongs from the factory).
The pickup says to keep the red and white wires soldered togeather and taped, i tried the small black wire on both the points on the switch (where i removed the white and red) and the pickup is extremely noisy and I can't figure out how to set this up. Please help. Thanks
The pickup says to keep the red and white wires soldered togeather and taped, i tried the small black wire on both the points on the switch (where i removed the white and red) and the pickup is extremely noisy and I can't figure out how to set this up. Please help. Thanks
Comment