Telecaster Modified Four Way Switch with Push-Pull Out of Phase

[Ltnpd]

Hello,

My Telecaster is currently wired with a four-way switch but my wiring is different from the 'standard' wiring. The positions are as follows:
- Position 1: Bridge Only
- Position 2: Bridge and Neck in Parallel
- Position 3: Bridge and Neck in Series
- Position 4: Neck Only

I would like to add out-phase via a push-pull pot similar to the Baja wiring (but without the S-1 switch).

My guitar was originally wired by my luthier, but now, I'm getting better at soldering and I'd rather do it myself...

I was looking at diagrams and found this for a push-pull baja wiring (I don't want to add a TBX) (Sorry I don't know how to add a picture):
http://www.tdpri.com/threads/baja-t...-instead-of-s-1-switch-is-it-possible.470592/
(The diagram is for the 'standard' 4-way switch wiring ... 1 = Bridge, 2 = Bridge and Neck Parallel, 3 = Neck, 4 = Bridge and Neck Series)

I don't understand how I can convert that schematic into what I want (1 = Bridge, 2 = Bridge and Neck Parallel, 3 = Bridge and Neck Series, 4 = Neck).

Can any of you help?

Thanks!
LTNPD

 

[jeremy]

Re: Telecaster Modified Four Way Switch with Push-Pull Out of Phase

not sure how yours is wired but adding a phase switch on one of the pups shouldnt be a big deal.

this is all you need to add to your existing wiring. https://docs.google.com/gview?embed...-content/uploads/2016/05/WD_S_ph_reversal.pdf

one pup to the push/pull then from there to the existing wiring

 

[AlexR]

Re: Telecaster Modified Four Way Switch with Push-Pull Out of Phase

Yep, as said the OOP just changes the hot and ground and can be done before the 4-way.
One thing is that if you are using traditional Tele pickups then the OOP pickup will need the chassis ground separated out from the pickup wire ground lead.