Good Karma Thread

[SrDeMaFp Ultimate Tone Slacker Find all posts View Profile Close SrDeMaFp]

Re: Good Karma Thread

Looking for 6 good quality chrome fillister screw pole pieces. The epiphone ones on my duncan are total tone suckers and I can't find the original gold ones I don't mind paying if anyone has any.

I got you, dude. Shoot me your addy.

[King IzzO))) Ultimate Kitten Puncher Find all posts View Profile Close King IzzO)))]

Re: Good Karma Thread

Stuff I've got to contribute to someone else's cause:

Stock tele bridge from Peavey Reactor, chrome peeling, no saddles.

Sack of import shaft pots, ie. alpha or whatever, mostly 500K's, but there's a couple 250's in there. less of these now, sending some to Indy

8 gold pickup mounting ring screws. GONE

One quality Gold metal dome knob.

Gold Schaller strap locks and buttons GONE

Gold R3 43mm top mount locknut, fits Ibanez.

Incomplete set of green key Gibson/Klusen style tuners from an SG, three tuners GONE

61 style SG pickguard 5 ply black w/fretboard end cover GONE

Used SG truss rod cover, black w/white "SG" GONE

Used black w/white Gibson rhythm/treble switch plate GONE

Kinda jacked-but might be useable for someone-green tortoise shell/W/B tele pickguard with strat single neck hole, was modified to fit a Peavey Reactor

Several Ibanez black metal knobs, fit import coarse spline pots.

I'm looking for the following:

A good bright white single coil cover.

Black or chrome modern style (3 rear screws) tele humbucker bridge, I don't need saddles.

[LatsMcGee Ultimate Tone Slacker Find all posts View Profile Close LatsMcGee]

Re: Good Karma Thread

Anyone have some 24 spline speed knobs?

[Kac Hootersologist Find all posts View Profile Close Kac]

Re: Good Karma Thread

I might have some speed knobs. What color you want?

[LatsMcGee Ultimate Tone Slacker Find all posts View Profile Close LatsMcGee]

Re: Good Karma Thread

I might have some speed knobs. What color you want?

Black, they'd need to fit CTS pots though...if you have them that would be great!

[bladefrenzy Tone Member Find all posts View Profile Close bladefrenzy]

Re: Good Karma Thread

I have several black hb mounting rings pm me if you need one/some, does anyone a creme angled one for neck pickup on a LP? Thanks.

[GAS-a-holic Tone Member Find all posts View Profile Close GAS-a-holic]

Re: Good Karma Thread

Been a while since I contributed so here goes:

I've got 3 EMG pickups that are just taking up space in my pickup drawer - an 81, 85 and 89 all with the quick connectors in great condition.

Also have an EMG 3--way switch and push pull pot for the 89.

First interested party takes it - hit me up!

EDIT: No more calls, we have a winner! firebirdguy72, they're all yours!

[firebirdguy72 안전놀이터추천 『‰』ＫaＫa８３.ＣoＭ까톡: oxiz 『‰』 해외 베팅 업체 Find all posts View Profile Close firebirdguy72]

Re: Good Karma Thread

Been a while since I contributed so here goes:

I've got 3 EMG pickups that are just taking up space in my pickup drawer - an 81, 85 and 89 all with the quick connectors in great condition.

Also have an EMG 3--way switch and push pull pot for the 89.

First interested party takes it - hit me up!

EDIT: No more calls, we have a winner! firebirdguy72, they're all yours!

Thanks! I'll find something to post here so stay tuned!

[Myaccount876 Amira-Maker Find all posts View Profile Close Myaccount876]

Re: Good Karma Thread

Stuff I've got to contribute to someone else's cause:

*Someone asked for a few of these items and I accidentally deleted the PM, so hit me up if it was you.

Stock tele bridge from Peavey Reactor, chrome peeling, no saddles.

Like new chrome Hipshot knock-off bridge w/screws.

Sack of import shaft pots, ie. alpha or whatever, 500K's and a couple 250's.

8 gold pickup mounting ring screws.

One quality Gold metal dome knob.

Gold Schaller strap locks and buttons

Gold R3 43mm top mount locknut, fits Ibanez.

Incomplete set of green key Gibson/Klusen style tuners from an SG, three tuners

61 style SG pickguard 5 ply black w/fretboard end cover

Used SG truss rod cover, black w/white "SG"

Used black w/white Gibson rhythm/treble switch plate

Well used (aged!) black SG standard knobs, 1 is missing the top insert, full set

Kinda jacked-but might be useable for someone-green tortoise shell/W/B tele pickguard with strat single neck hole, was modified to fit a Peavey Reactor

Various Ibanez metal knobs in black and cosmo, fit import coarse spline pots. I've got a few sets of these.

8 ohm Wharfedale GSH12-30, decent 30w G12-H/greenback mishmash from a Vox AC, barely used. Pay shipping and it's yours.


I'm looking for the following:

black Dimarzio single sized humbucker cover for a chopper. I have a white one I can swap.

Black or chrome modern style (3 rear screws) tele humbucker bridge, I don't need saddles.

PM sent on the Wharfedale Greenback clone.

[fifty seven Junior Member Find all posts View Profile Close fifty seven]

Re: Good Karma Thread

good luck

[GAS-a-holic Tone Member Find all posts View Profile Close GAS-a-holic]

Re: Good Karma Thread

Stuff I've got to contribute to someone else's cause:

Stock tele bridge from Peavey Reactor, chrome peeling, no saddles.

Sack of import shaft pots, ie. alpha or whatever, mostly 500K's, but there's a couple 250's in there.

8 gold pickup mounting ring screws.

One quality Gold metal dome knob.

Gold Schaller strap locks and buttons

Gold R3 43mm top mount locknut, fits Ibanez.

Incomplete set of green key Gibson/Klusen style tuners from an SG, three tuners

61 style SG pickguard 5 ply black w/fretboard end cover

Used SG truss rod cover, black w/white "SG"

Used black w/white Gibson rhythm/treble switch plate

Kinda jacked-but might be useable for someone-green tortoise shell/W/B tele pickguard with strat single neck hole, was modified to fit a Peavey Reactor

Several Ibanez metal knobs, black, fit import coarse spline pots.

I'm looking for the following:

black Dimarzio single sized humbucker cover for a chopper. I have a white one I can swap.

Black or chrome modern style (3 rear screws) tele humbucker bridge, I don't need saddles.

PM sent for the Schaller strap locks.

[IndySG Tone Member Find all posts View Profile Close IndySG]

Re: Good Karma Thread

Got some SG parts and pots from King Izz0))) - thanks a million!
Anyone need some Epi pickups? I have three sitting around one with a gold cover on it which must double the value right there!

[King IzzO))) Ultimate Kitten Puncher Find all posts View Profile Close King IzzO)))]

Re: Good Karma Thread

Updated list:

Stock tele bridge from Peavey Reactor, some chrome peeling, no saddles.

Sack of several import shaft pots, ie. alpha or whatever, mostly 500K's, but there's a couple 250's in there.

One quality Gold metal dome knob w/set screw.

Gold 43mm top mount locknut, fits Ibanez.

Green tortoise shell/W/B tele pickguard with strat single neck hole, was modified to fit a Peavey Reactor

Several Ibanez black metal knobs, fit import coarse spline pots.

I'm looking for the following:

Black or chrome modern style (3 rear screws) tele humbucker bridge, I don't need saddles.

[925SS Ultimate Tone Member Find all posts View Profile Close 925SS]

Re: Good Karma Thread

Got some SG parts and pots from King Izz0))) - thanks a million!
Anyone need some Epi pickups? I have three sitting around one with a gold cover on it which must double the value right there!

Is one a neck pup?
Don't need em all, & don't want to take what I can't use/don't need.

I have a black asian abr type (large posts) with posts, & inserts, & a set of cream hum pup rings (asian) sanded flat on bottom (bridge slightly taller)

(Gone to IndySG)

[PushedCrayon Ultimate Tone Member Find all posts View Profile Close PushedCrayon]

Re: Good Karma Thread

I've got a pearloid hh strat pickguard with the pots and all still in it. If you want it just message me!

Sent from my SAMSUNG-SM-G925A using Tapatalk