2003 PRS SINGLE CUT KILLER TOP BIRDS

brentrocks

New member
For your viewing pleasure....

A 2003 PRS Single Cut!  

This PRS boasts a beautiful flamed maple top over a one piece mahogany body.   Dark Indian rosewood fret board with abalone birds over a mahogany neck.  Also a killer 59-ish burst on this bad boy!!

This SC features #7 pickups from the factory.  They sound absolutely amazing!!!  This guitar produces a fat, warm, rich tone that you would expect from a guitar of this caliber.

It has its share of dings, dents and chips.   The pics make it look much worse that it appears in person....its all honest play wear....certainly not abused.  The lightweight aluminum tailpiece/studs and pickup covers are showing some tarnish/patina. I had to replace the bridge volume pot (super  scratchy and would not clean up)...the rest of the guitar is factory stock.

It weighs in at just under 10 lbs.   The neck is quite chunky.   The frets look like new...no divots.

This PRS plays like a dream....low action and a real joy to up and down the fretboard.

The case is worn, but all the latches and hinges are intact. 

There are no cracks, breaks or repairs.  The neck is true and the truss rod functions perfectly.

A guitar that will deliver tone and playability to sooth the senses....

$1785 plus shipping

I will ship internationally

Thanks for looking!!!


















 
Re: 2003 PRS SINGLE CUT KILLER TOP BIRDS

a lot of people have been asking me.....

I do not use flash in my photos....these pics were taken with my phone, but no flash
 
Re: 2003 PRS SINGLE CUT KILLER TOP BIRDS

Ya know, just between me and Mr. Smith - I don't give a rip about his damn birds.
 
Re: 2003 PRS SINGLE CUT KILLER TOP BIRDS

I was upgrading this guitar to Kluson Revolution locking tuners yesterday.   While taking out the old bushings, I had a couple spots chip out on the front of the headstock.   The good news is that you will be getting the best locking tuners on the market.....the bad news is there are a couple cosmetic blems on the headstock now.

I was replacing the tuners because the housings on the originals were starting to loosen and get sloppy, so I figured I might as well upgrade to a locking tuner.

I will discount the price due to this boo boo

feel free to make me an offer


 
Back
Top