wineandpiss
New member
So.. I've had my blackouts not even for 2 years and now the god damn bridge pickup stopped working.. I've tried it on 2 of my guitars. No sound. How the hell can that happen??
Try the bridge pickup connected to the neck electronics. If there really is a a problem contact us here for an RMA number (links at the bottom of the homepage) , send it in and we will see if it can be fixed.
Did it all of a sudden stop working, or did you pull it out to do something to your guitar and put it back in and it hasn't worked since?
Sent from my SAMSUNG-SM-G870A using Tapatalk
Try the bridge pickup connected to the neck electronics. If there really is a a problem contact us here for an RMA number (links at the bottom of the homepage) , send it in and we will see if it can be fixed.
Have you checked the wiring? Check every single connection, especially those that carry the "hot" signal. To quickly check if it is a wiring issue or pickup issue, wire the bridge pickup straight to the jack. White goes to tip, bare goes to sleeve, red to the 9v+/9v- to ring. check for continuity of all connections with a multi meter. Also, make sure you're using a cable that is known to work flawlessly.
Also, does the guitar have separate volume controls for each pickup? If so, it could be just the bridge volume potentiometer going bad. Or if the pickup leads go to the selector switch first, it could be a faulty switch/bad contacts.