building specs for a compact isolation cab (10-in speaker)
- Thread starter DankStar
- Start date
DankStar
Her Little Mojo Minion
Re: building specs for a compact isolation cab (10-in speaker)
that would be cool! how do you like it for recording - is it OK?
that would be cool! how do you like it for recording - is it OK?
ksmith63
New member
Re: building specs for a compact isolation cab (10-in speaker)
i like it quite a bit. it seems to give a little more compressed sound than a normal amp in an open room but a little eq-ing helps. this could be my microphone (i have a shure pg-81 which is actually a condenser mic made for cymbals). other than that it sounds great and records really well. bass sounds equally as good.
i'll give you all the info on it later. i should get back to my apartment in an hour or two.
i like it quite a bit. it seems to give a little more compressed sound than a normal amp in an open room but a little eq-ing helps. this could be my microphone (i have a shure pg-81 which is actually a condenser mic made for cymbals). other than that it sounds great and records really well. bass sounds equally as good.
i'll give you all the info on it later. i should get back to my apartment in an hour or two.
Agustaburn
New member
Re: building specs for a compact isolation cab (10-in speaker)
I just built a monster iso cab w/ a 12" V30. Good in concept, very quiet, but if you crank it too loud I'd get some weird distorion. And you can't get any feedback as it's not in the same room.
I just built a monster iso cab w/ a 12" V30. Good in concept, very quiet, but if you crank it too loud I'd get some weird distorion. And you can't get any feedback as it's not in the same room.
ksmith63
New member
Re: building specs for a compact isolation cab (10-in speaker)
dimensions in inches
overall outside dims: 18 x 18 x 32
inside bottom cavity: 16.5 x 16.5 x 12 this is where the back of the speaker sits
port tube: 3 diameter, 4.75 length
inside top open cavity: 16.5 x 16.5 x 9 this is where the mic is mounted + you can see the front of the speaker
inside top/lid: 16.5 x 16.5 x 7.75 this opens + closes on hinges and has a thick layer of fiberglass stapled to all inside walls
dimensions in inches
overall outside dims: 18 x 18 x 32
inside bottom cavity: 16.5 x 16.5 x 12 this is where the back of the speaker sits
port tube: 3 diameter, 4.75 length
inside top open cavity: 16.5 x 16.5 x 9 this is where the mic is mounted + you can see the front of the speaker
inside top/lid: 16.5 x 16.5 x 7.75 this opens + closes on hinges and has a thick layer of fiberglass stapled to all inside walls
Similar threads
