Callaham bridges and Japanese bodies

Re: Callaham bridges and Japanese bodies

he has a couple newer versions now, so you may even want to measure your overall center-to-center spacing
 
Re: Callaham bridges and Japanese bodies

Will a Callaham bridge fit nicely without hassle on a Japanese Strat body?

I have a MIJ 57/62 reissue trem here and a Callaham. They are directly interchangeable complete or in parts.

But there are many other MIJ Strats out there.
 
Re: Callaham bridges and Japanese bodies

I fitted a Callaham bridge to my 82 Tokai Strat and at first glance it seemed it would fit just fine, but on closer examination the body holes were fractionally out and caused a very slight amount of binding on the 6 pivot screws when the bridge was rocked back and forth. Fixing that could involve filling and re-drilling some of the 6 mounting-screw holes in the body, or opening up some of the holes into a slightly oval shape at the front of the bridge plate with a tiny needle file. But contact Callaham first, as has been suggested.
 
Back
Top