Coil splitting question..HH with 1V 1T 1PP 3 way
- Thread starter ekieegan
- Start date
BriGuy1968
New member
Re: Coil splitting question..HH with 1V 1T 1PP 3 way
Yes... in that diagram, when the push/pull is pulled BOTH humbuckers will be split, so in the 3-way's center position it would be:
Yes... in that diagram, when the push/pull is pulled BOTH humbuckers will be split, so in the 3-way's center position it would be:
- Down = Bridge & Neck Humbuckers
- Up = Bridge & Neck Split
DrNewcenstein
He Did the Monster Mash
Re: Coil splitting question..HH with 1V 1T 1PP 3 way
I'm having trouble understanding the question. It doesn't appear as simple as BriGuy's response, especially the "play to each split coil" part.
Then again, I may be over-thinking it and he's not asking about Artie's CoilSwap mod at all :lol:
The diagram you've posted will, as BriGuy said, split both pickups at the same time. However, to go further into the obvious detail, they will remain split no matter what position the 3-way is in, until you push the push-pull down again. That means the bridge by itself will be split, the neck by itself will be split, and they'll both be split together.
I'm having trouble understanding the question. It doesn't appear as simple as BriGuy's response, especially the "play to each split coil" part.
Then again, I may be over-thinking it and he's not asking about Artie's CoilSwap mod at all :lol:
The diagram you've posted will, as BriGuy said, split both pickups at the same time. However, to go further into the obvious detail, they will remain split no matter what position the 3-way is in, until you push the push-pull down again. That means the bridge by itself will be split, the neck by itself will be split, and they'll both be split together.
Last edited:
IMENATOR
Well-known member
Re: Coil splitting question..HH with 1V 1T 1PP 3 way
+1 here, it sounds like he wants inner coils and outer coils. To me it sounds like he is looking something similar like this but he would need 2 pus/pulls
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_prails_1v_1t_tspp
Edit: Or maybe similar to this as he does only look for coil splits
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_p_rails_2v_2t_3w_2mt
+1 here, it sounds like he wants inner coils and outer coils. To me it sounds like he is looking something similar like this but he would need 2 pus/pulls
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_prails_1v_1t_tspp
Edit: Or maybe similar to this as he does only look for coil splits
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_p_rails_2v_2t_3w_2mt
Last edited:
BriGuy1968
New member
Re: Coil splitting question..HH with 1V 1T 1PP 3 way
After looking a little closer at the OP's wording, I see what you guys are saying. I was assuming he just wanted to make sure that both pickups would be running split when the 3-way was centered... but the wording is a little confusing. Hey ekieegan, maybe you could clarify. You've got 3 guys here willing to help you out, but we need a little more info (or at least to get on the same page with terminology).
[emoji450]Sent from my iPhone using Tapatalk [emoji441]
After looking a little closer at the OP's wording, I see what you guys are saying. I was assuming he just wanted to make sure that both pickups would be running split when the 3-way was centered... but the wording is a little confusing. Hey ekieegan, maybe you could clarify. You've got 3 guys here willing to help you out, but we need a little more info (or at least to get on the same page with terminology).
[emoji450]Sent from my iPhone using Tapatalk [emoji441]
DrNewcenstein
He Did the Monster Mash
Re: Coil splitting question..HH with 1V 1T 1PP 3 way
...and he was never heard from again. Yet another victim of the Internet's insatiable appetite for human flesh. :lol:
...and he was never heard from again. Yet another victim of the Internet's insatiable appetite for human flesh. :lol:
