Complicated wiring help please!!

[Doc Holiday]

I haven't been able to find a schematic anywhere on this and I'm not good enough to modify ones on my own. I am getting two Lace Sensor Aluma 90 pickups (basically P-90's and 3 wires) and here is what I'm looking for:

Bridge
Neck
Neck and bridge in series in phase
Neck and bridge parallel in phase
Neck and bridge in series out of phase
Neck and bridge parallel out of phase

I also want each volume and tone to work separately so when both pickups are on each pickup still has it's own volume and tone control.

The pickup combinations are the same as the Baja Tele but I don't want a blade switch. I want either toggles or push/pull pots or a combination. A 3 way switch like a LP is fine as well as an on/off switch for each pickup...which ever works in the schematic.

Thanks for any help you can provide!

 

[cohara41]

Re: Complicated wiring help please!!

Hermatico gave me one that I think you need. Do a search. You'll use a 3way switch and two Push/Pulls or toggles DPDT. One for phase shifting and the other for series/parrallel that will eliminate the 3way switch for series.......Good luck.....Chhers

 

[cohara41]

Re: Complicated wiring help please!!

Search The Pickup Lounge if you haven't already............Cheers