Correct SD Diagram??

Z

zozoe

New member
hi all~ Will this diagram split my neck SM-3 as well? I tend to think not as the neck pup isn't showing the same # of wires as the bridge.... Any appropriate schem out there? My push/pull is on the tone pot...
Many thnx~

p.s.
it's still there:11:
 

Attachments

  • Screenshot_20210705-003640_Chrome.jpg
    Screenshot_20210705-003640_Chrome.jpg
    55.7 KB · Views: 0
Last edited:
zozoe said:
hi all~ Will this diagram split my neck SM-3 as well? I tend to think not as the neck pup isn't showing the same # of wires as the bridge.... Any appropriate schem out there? My push/pull is on the tone pot...
Many thnx~
Click to expand...

Zozoe,

That diagram is intended to split the neck and bridge at the same time but it has an error. The Red & White wires from the neck pickup are supposed to connect to the rightside middle lug of the push-pull switch, not run to Ground like the diagram shows.

The diagram has a 2nd error: it is missing the Green and Bare wires for the neck pickup. Those 2 wires should be wired to Ground (the back of a pot) just like you see the Bridge humbucker's Green and Bare wires routed.

The diagram also has a 3rd error with the wiring on the 5 way selector switch. The wire that comes off the 5 way switch and then connects to the volume pot needs to be fixed as follows: that wire needs to come off the 5 way switch fron the last empty lug on the same side of the switch where the 3 pickup hot wires are attached, not the 2nd lug on the side its currently shown coming off.

I'll make a post about the problems in this diagram in the thread "Is there a problem with this diagram?"
 
Last edited:
& in all my inquisitive novice'ness, I'm learning fast, and I felt something was amiss,,,, Thanks guys

p.s.
here's the patient Screenshot_20210319-230247_Gallery.jpg
 

Attachments

  • Screenshot_20210319-230247_Gallery.jpg
    Screenshot_20210319-230247_Gallery.jpg
    44.7 KB · Views: 0
Indeed, MINCER,,, i picked this up, like new, at a FL GC for an obscene 300 bucks, & it plays great, nice C neck, delicious medium jumbos, & the P/P circuitry already there, so I'm simply upping the most likely mediocre EPI pickups, one by one,,, or I may just live with the other 2,,, but the SM3 came along at a great price,,, so,,, wth~
 
Last edited:
You must log in or register to reply here.
Back
Top