Dumb Wiring Question

[WITH FULL DISTORTION]

Hails guys
i´m having problems getting always one of the 3 way position switch OUT of phase .
i recently threw off the guitar, my cc. cause i sold it, and replaced with a C5...
after that, i´m getting the ****ign out of phase(wha wha sounds) from it.
i rewired two time,s but i´m sure i´m screwing up someting
can you help me?
ok.. you can tell me "search function" OR read the SD schematics.. BUT, there´s no ****ing schematics for me
i already searched it, it always seems to not match my guitar configuration(H-S + 3 way switch and ONLY one volume pot)
Or.. the 3 way switch is NEVER the same .
any help?
THANK´S in advance
PS - is ****ing good to have motivation to post here again....
and it´s ALWAYS ****ing good to be back "HOME" again
q
J.P

 

[WITH FULL DISTORTION]

Re: Dumb Wiring Question

do you want any aditional infos or pics? i can take it.

 

[Artie]

Re: Dumb Wiring Question

Hey Mr D; As a starting point, use this diagram:

2hb_1vol_3way.html

Then make these changes:

I assume your neck pup is a single. Is it a Duncan? Then use black for green. (ground) Use white for black. (hot)

Any 3-way should basically have two "input" lugs, and an output lug.

What kind of 3-way is it? We'll get this.

Artie

 

[WITH FULL DISTORTION]

Re: Dumb Wiring Question

Thank´s Unholy Mr Artie. ahahahah
Yeah
Custom five nickel cover bridge, Hotrails Neck.
i´m gonna take a pic of the guitar
Wait a minute.

 

[WITH FULL DISTORTION]

Re: Dumb Wiring Question

Artie=Wiring Magicianologist.

 

[WITH FULL DISTORTION]

Re: Dumb Wiring Question

well.. while i don´t get the pic of the switch
it´s a 3 way BLADE switch. with all the metalic points/connector IN line.
Like this 0-0-0-0-0-0-0
AND not like this :
0-0-0-0-0-0-0-0
0-0-0-0-0-0-0-0

 

[WITH FULL DISTORTION]

Re: Dumb Wiring Question

heres the Pic Artie.

 

[Marcel]

Re: Dumb Wiring Question

why is black and bare soldered together?? The bare have to go to ground together with the green