Duncan Distortion Series / Parallel wiring for CTS push pull pot with 4 conductor

[donniecrump]

Curious how I would go about wiring up my Duncan Distortion for a push pull series/parallel setup with this style CTS pot. I have added a photo to show what I am trying to accomplish. When the pot is pushed the wiring will be standard series. When pulled the wiring is parallel. Thanks, Donnie

 

[JamesPaul]

This wiring diagram is what you are looking for.

https://www.seymourduncan.com/images..._1V_1TppSP.jpg

It looks like for the model of CTS pot you have:

Black to 1
Green & Bare to 3 (note that 3 is jumpered to ground, so Green & Bare could also go to any ground)
Red to C1
White to C2 & 2 (or jumper from C2 to 2 and white to either)
4 is not used

Side note, I would put the pot with switch on whichever control you use the least. For me that is Tone.

 

[hamerfan]

These CTS look pretty flimsy and are pia to solder.

 

[Artie]

Here's the translation from Stew-Mac: