SpeedDemon
New member
:yell: :saeek: i am looking at the internals of my muff fuzz box as i speak any suggestions on mods/ and or how to do them, i dont really care wat happens to it lol all sugestions welcome
Electro harmonix Muff fuzz
- Thread starter SpeedDemon
- Start date
Imp
New member
Re: Electro harmonix Muff fuzz
http://www.generalguitargadgets.com/index.php?option=content&task=view&id=27&Itemid=52
theres a few mods you could have a go on... not many BMP mods have a huge effect though, from what i've tried..
http://www.generalguitargadgets.com/index.php?option=content&task=view&id=27&Itemid=52
theres a few mods you could have a go on... not many BMP mods have a huge effect though, from what i've tried..
drew_half_empty
Looking for Real Life
Re: Electro harmonix Muff fuzz
...depends on what you want out of it
lew seemed to have success putting a ds-1 into the signal chain, you may try that
...depends on what you want out of it
lew seemed to have success putting a ds-1 into the signal chain, you may try that
Chaos
New member
Re: Electro harmonix Muff fuzz
for starters:
You can replace the transistors with higher / lower hfe values to increase / decrease the gain of each stage.
Change the clipping diodes to germanium or even LEDs to change the clipping point.
Add or remove a clipping diode for asymmetrical clipping.
Replace all the ceramic and electrolytic capacitors with poly / metal / mica film capacitors to reduce the harshness.
Change the values in the tone stack to shift the range of the tone control, or replace it entirely with a baxandall type control using a dual concentric pot.
Install a true-bypass switch (if your pedal is an older / Russian model)
Change the color of the LED (serves no purpose – looks cool?)
Add a power adapter socket if your pedal doesn’t have one
for starters:
You can replace the transistors with higher / lower hfe values to increase / decrease the gain of each stage.
Change the clipping diodes to germanium or even LEDs to change the clipping point.
Add or remove a clipping diode for asymmetrical clipping.
Replace all the ceramic and electrolytic capacitors with poly / metal / mica film capacitors to reduce the harshness.
Change the values in the tone stack to shift the range of the tone control, or replace it entirely with a baxandall type control using a dual concentric pot.
Install a true-bypass switch (if your pedal is an older / Russian model)
Change the color of the LED (serves no purpose – looks cool?)
Add a power adapter socket if your pedal doesn’t have one
