Fulltone Clyde Deluxe Problem

[Gunny47]

Picked the thing up today, plugged it in, played with the various settings for a half hour, tried it with other pedals, sounded friggen awesome! Jsut what I was looking for, best wah pedal, gave me the fat cream sound without the noise or the tone sucking when it is off. I played around with it some more, and the next thing I knew, the bypass does not work. I cannot turn it on or off - it doesn't "click." I'm a big guy, but I do not weigh 500 pounds and guys like Warren Haynes pound on these wahs all the time, so I do not think that I broke it being that I was being gentle with it anyway. The manual says that the amount of pressure to put the pedal on can be adjusted, but I could not find any info on how to do this. Any suggestions/tips or is this thing defective? thanks

 

[Gearjoneser]

Re: Fulltone Clyde Deluxe Problem

Feel underneath the pedal where it touches down on the switch. There should be a rubber stopper in there. It's possible that it fell out.

Check all those rubber stoppers.....there should be 3 of them on the front end of the pedal.

Also, make sure the switch's height is right, and not loose or sinking into the pedal.

 

[Simon_F]

Re: Fulltone Clyde Deluxe Problem

Also check whether you can switch the wah on and off by putting your thumb under the treddle and pushing the switch. If you can, the switch is OK and it's an adjustment issue. If you can't, the switch is faulty.