Gibson Custom shop
- Thread starter Travis H
- Start date
Travis H
New member
Re: Gibson Custom shop
I would have them Build me a Gibson Les Paul Custom With an Ebony finger Bord 24 frets 5 piece mahogany neck with black binding, block inlays mahogany body with a super thick AAAA flame maple top with purple dye one humbucker and a Floyd rose. and matching black binding around the body
I would have them Build me a Gibson Les Paul Custom With an Ebony finger Bord 24 frets 5 piece mahogany neck with black binding, block inlays mahogany body with a super thick AAAA flame maple top with purple dye one humbucker and a Floyd rose. and matching black binding around the body
Andrew Lamprecht
Minion of One
Re: Gibson Custom shop
I believe they make them for everyone but they are very expensive...
I believe they make them for everyone but they are very expensive...
Andrew Lamprecht
Minion of One
Travis H
New member
Re: Gibson Custom shop
I would not expect them to hold there value due to being so personal
I would not expect them to hold there value due to being so personal
super rad stuff
Skaforlifeologist
Re: Gibson Custom shop
no budget custom gibson? it'd be sumthin' like this....
-double cut les paul, with toggle switch in the upper bout for standard les paul controls
-split parallelogram inlays
-long tenon maple neck
-contoured neck heel
-30/60 neck carve
-stainless medium-jumbo frets
-ebony fretboard
-off white binding on headstock with custom inlay
-matching binding on neck and body
-semi plain semi quilted maple top on korina body,
-a5/a4 phat cat in the neck, stock PG in the bridge with distressed covers
-artie/page wiring scheme with custom bourns 500k push-pull pots
-tonepros bridge and tailpiece
-creme pickup rings and pickguard
-satin medium/dark green finish on the top, natural satin for the body and neck
no budget custom gibson? it'd be sumthin' like this....
-double cut les paul, with toggle switch in the upper bout for standard les paul controls
-split parallelogram inlays
-long tenon maple neck
-contoured neck heel
-30/60 neck carve
-stainless medium-jumbo frets
-ebony fretboard
-off white binding on headstock with custom inlay
-matching binding on neck and body
-semi plain semi quilted maple top on korina body,
-a5/a4 phat cat in the neck, stock PG in the bridge with distressed covers
-artie/page wiring scheme with custom bourns 500k push-pull pots
-tonepros bridge and tailpiece
-creme pickup rings and pickguard
-satin medium/dark green finish on the top, natural satin for the body and neck
John_L
New member
Re: Gibson Custom shop
I was talking more about the ones that are not really personal, just a fancy top and great finish.
I was talking more about the ones that are not really personal, just a fancy top and great finish.
John_L
New member
ImmortalSix
John Mayer's Mankini
Re: Gibson Custom shop
I'd have them build me a dead on '59. Boring, but true.
I'd have them build me a dead on '59. Boring, but true.
Travis H
New member
Re: Gibson Custom shop
That sir sounds freeking sweet!!
ah i see
Really? whats the site? I would love me some heritage
No way man 59's kick ass
That sir sounds freeking sweet!!
ah i see
Really? whats the site? I would love me some heritage
No way man 59's kick ass
Got_tone?
New member
Re: Gibson Custom shop
I want this from the gibson CS:
First One is a Gibson CS-356. I want the exact finish but on a es-359 w/ the 30/60 neck.
Second one is a Gibson Gary Rossington '59 LP. I want same guitar but with no aging.
*edit*
Too bad they'll probably cost me $4k+..... :nervous:
I want this from the gibson CS:
First One is a Gibson CS-356. I want the exact finish but on a es-359 w/ the 30/60 neck.
Second one is a Gibson Gary Rossington '59 LP. I want same guitar but with no aging.
*edit*
Too bad they'll probably cost me $4k+..... :nervous:
Last edited:
Andrew Lamprecht
Minion of One
JaySwear
New member
Re: Gibson Custom shop
a custom les paul BFG of sorts... mahogany body and neck, rosewood fingerboard. nice flame maple top with the rootbeer finish. humbucker bridge (probably zebra) with a black p90 in the middle position (instead of neck). same BFG control set up (i think it was 2 tones, 1 volumes, 3 way switch, and a killswitch?). white binding on the body and neck/headstock. most important part for me would be a rib contour too :sad: i'm a skinny bastard and a normal les paul really digs into my ribs! makes playing for too long really uncomfortable
a custom les paul BFG of sorts... mahogany body and neck, rosewood fingerboard. nice flame maple top with the rootbeer finish. humbucker bridge (probably zebra) with a black p90 in the middle position (instead of neck). same BFG control set up (i think it was 2 tones, 1 volumes, 3 way switch, and a killswitch?). white binding on the body and neck/headstock. most important part for me would be a rib contour too :sad: i'm a skinny bastard and a normal les paul really digs into my ribs! makes playing for too long really uncomfortable
