T telemike New member Sep 4, 2017 #1 I have a neck P90 that is out of phase with my humbucker in the triple shot ring. How do I wired the bridge coils to work with the P90? I tried flipping the P90 wires but it grounds out so no go there
I have a neck P90 that is out of phase with my humbucker in the triple shot ring. How do I wired the bridge coils to work with the P90? I tried flipping the P90 wires but it grounds out so no go there
A AlexR New member Sep 4, 2017 #2 Re: Help needed. Triple **** ring. Flip polarity Flip magnet(s) in one pickup. Bridge is probably easier as there is only 1.
Re: Help needed. Triple **** ring. Flip polarity Flip magnet(s) in one pickup. Bridge is probably easier as there is only 1.
Arwin New member Sep 7, 2017 #3 Re: Help needed. Triple **** ring. Flip polarity This Diagram shows the wiring you would need to do on the tripleshot to get your pickups back in phase, enjoy!!
Re: Help needed. Triple **** ring. Flip polarity This Diagram shows the wiring you would need to do on the tripleshot to get your pickups back in phase, enjoy!!
T telemike New member Sep 7, 2017 #4 Re: Help needed. Triple **** ring. Flip polarity I ended up flipping the magnet. Was easier than resoldering
Re: Help needed. Triple **** ring. Flip polarity I ended up flipping the magnet. Was easier than resoldering
Mincer Administrator Staff member Sep 7, 2017 #5 Re: Help needed. Triple **** ring. Flip polarity And it is working well now?
