HELP! Only one pickup is working
- Thread starter EddieNaylor
- Start date
Kamanda~SD
New member
Re: HELP! Only one pickup is working
Well a few things:
1. Looks like you need to work on your soldering and perhaps have a hotter iron.
2. What diagram are you following?
3. Do you have a multimeter?
4. Can you take a more detailed pic of the switch?
Well a few things:
1. Looks like you need to work on your soldering and perhaps have a hotter iron.
2. What diagram are you following?
3. Do you have a multimeter?
4. Can you take a more detailed pic of the switch?
EddieNaylor
New member
Re: HELP! Only one pickup is working
Well I’m following 3 different diagrams because I cannot select from the Seymour Duncan page the configuration that I have, S4N neck STKS6 middle and humbucker bridge
Tested all my pots and pickups and they are working correctly it is something wrong with the wiring I know for sure
Well I’m following 3 different diagrams because I cannot select from the Seymour Duncan page the configuration that I have, S4N neck STKS6 middle and humbucker bridge
Tested all my pots and pickups and they are working correctly it is something wrong with the wiring I know for sure
Kamanda~SD
New member
Re: HELP! Only one pickup is working
I am assuming you're just going for standard config (masVol - nTone - mTone):
If you could provide a cleaner pic of the switch that would help as it looks like some of those joints may not be making proper contact. You can always take a multi-meter to them and 'trace' it for continuity as well.
EDIT: Also just want to confirm, it looks to me like you should be using THIS diagram, but replacing the bridge pickup with THIS one.
First link doesnt seem to be working, full url: https://docs.google.com/gview?embed...content/uploads/2016/05/3STKplus_5W_1V_2T.pdf
I am assuming you're just going for standard config (masVol - nTone - mTone):
If you could provide a cleaner pic of the switch that would help as it looks like some of those joints may not be making proper contact. You can always take a multi-meter to them and 'trace' it for continuity as well.
EDIT: Also just want to confirm, it looks to me like you should be using THIS diagram, but replacing the bridge pickup with THIS one.
First link doesnt seem to be working, full url: https://docs.google.com/gview?embed...content/uploads/2016/05/3STKplus_5W_1V_2T.pdf
Last edited:
