Not sure if anyone would be able to lend some knowledge. I'm replacing the cheap push pull pot that came with my Washburn N24, along with replacing the neck pickup with an SD Jazz. I've also cleaned up all of the unnecessary extra wire that was crammed in there. I've wired everything up the same way it was. The exception being the Jazz wire colors are different than the original Washburn neck pickup. So, I have the red and white Jazz wires where the Washburn red and green wires were. And the black Jazz wire where the white Washburn wire was. I'm getting sound, but it's very faint. The switching and coil tapping is also working.
Sent from my ONEPLUS A6013 using Tapatalk
Sent from my ONEPLUS A6013 using Tapatalk
