Quencho092
New member
i was wondering how effective a good fret dress is. Anybody had one? I hear it feels real smooth and nice once its done, and the frets are perfectly even.
How effective is a good fret dressing
- Thread starter Quencho092
- Start date
Quencho092
New member
Re: How effective is a good fret dressing
but how much fret does it eat away.
but how much fret does it eat away.
Gearjoneser
Gear Ho
Re: How effective is a good fret dressing
Usually, you dress the frets down to the point of it's worst divets...2nd fret G.
If you're worried about taking off too much fret height, you might be surprised that you prefer the feel of a guitar that's had a fretdress.
Over a year ago, I did it on my favorite strat, thinking it would mess with it's feel. IT DID. Now, the guitar feels more like a Custom Shop than an Am Std.
Quencho092 said:
Usually, you dress the frets down to the point of it's worst divets...2nd fret G.
If you're worried about taking off too much fret height, you might be surprised that you prefer the feel of a guitar that's had a fretdress.
Over a year ago, I did it on my favorite strat, thinking it would mess with it's feel. IT DID. Now, the guitar feels more like a Custom Shop than an Am Std.
Quencho092
New member
Re: How effective is a good fret dressing
so how much is the average fret dress?!?
so how much is the average fret dress?!?
Boston Joe
New member
Re: How effective is a good fret dressing
Another alternative is to replace the most heavily pitted frets and dress all the frets accordingly.
Another alternative is to replace the most heavily pitted frets and dress all the frets accordingly.
Boston Joe
New member
Re: How effective is a good fret dressing
That's true, but you would still have plenty of fret left over if you didn't grind the top of each fret down to the level of the lowest pit. This allows for further dressing in the future before you have to refret the entire board.
JohnJohn said:
That's true, but you would still have plenty of fret left over if you didn't grind the top of each fret down to the level of the lowest pit. This allows for further dressing in the future before you have to refret the entire board.
Quencho092
New member
Re: How effective is a good fret dressing
well, would it be smart to get a light fret dressing done on a new fender, just to round off the frets as they seem rectangular in shape rather than well curved. I'm sure that theres room for improvement fretwise, but i just wanted to know if it would be adviseable. And how quickly do the frets wear if one plays every day, say 2 hours
well, would it be smart to get a light fret dressing done on a new fender, just to round off the frets as they seem rectangular in shape rather than well curved. I'm sure that theres room for improvement fretwise, but i just wanted to know if it would be adviseable. And how quickly do the frets wear if one plays every day, say 2 hours
rspst14
Tone Cat
Re: How effective is a good fret dressing
This is one reason why I like tall frets. My Hamer came stock with medium jumbos, and I find them too short to begin with. If I have a tech level them, they're going to be even shorter. Instead, I'm going to have it refretted with 6100 fretwire. Tall frets will last you much longer than shorter ones, because you can level them and still play comfortably due to the extra height they had to begin with.
Ryan
This is one reason why I like tall frets. My Hamer came stock with medium jumbos, and I find them too short to begin with. If I have a tech level them, they're going to be even shorter. Instead, I'm going to have it refretted with 6100 fretwire. Tall frets will last you much longer than shorter ones, because you can level them and still play comfortably due to the extra height they had to begin with.
Ryan
JammerMatt
New member
Re: How effective is a good fret dressing
Probably mandatory for a new LP. I don't get it, after shelling out 1600 for a Classic. But, after the fret dress and pro setup, it played like butter.
Probably mandatory for a new LP. I don't get it, after shelling out 1600 for a Classic. But, after the fret dress and pro setup, it played like butter.
Quencho092
New member
Re: How effective is a good fret dressing
how big are stock fender american strat frets compared to jumbos? How much is fretwire?
how big are stock fender american strat frets compared to jumbos? How much is fretwire?
Re: How effective is a good fret dressing
I have a luthier who has used solder to rebuild the frets on my 63 P bass when they get low spots in them. Yes, I said solder! It works quite well, is very hard, and he's done it for several guitarists and bassists locally with good results. The job lasts for about ten years and doesn't affect tone. I've heard other luthiers scoff at this, but it has worked out well for me.
I have a luthier who has used solder to rebuild the frets on my 63 P bass when they get low spots in them. Yes, I said solder! It works quite well, is very hard, and he's done it for several guitarists and bassists locally with good results. The job lasts for about ten years and doesn't affect tone. I've heard other luthiers scoff at this, but it has worked out well for me.
Ken
PlayingWithDollsologist
Re: How effective is a good fret dressing
Yeah, that's a little odd for registering earlier in the month. Especially cuz I haven't seen him around until now.
I was just going to answer the question about fret-wear. The simple answer: it depends.
Factors in fret wear:
How heavy is your touch?
The type of strings used
Truss rod set-up
Type of fretwire used
Bridge height (if you're having to bring the strings down from high off the board, you'll likely have a heavier hand)
Even hand acid/oil composition
Playing environment
Essentially, every factor that can affect string life will also affect fret wear. Guys with experience in dressings will be able to tell you a general timeframe to expect.
Yeah, that's a little odd for registering earlier in the month. Especially cuz I haven't seen him around until now.
I was just going to answer the question about fret-wear. The simple answer: it depends.
Factors in fret wear:
How heavy is your touch?
The type of strings used
Truss rod set-up
Type of fretwire used
Bridge height (if you're having to bring the strings down from high off the board, you'll likely have a heavier hand)
Even hand acid/oil composition
Playing environment
Essentially, every factor that can affect string life will also affect fret wear. Guys with experience in dressings will be able to tell you a general timeframe to expect.
T
theodie
Guest
Re: How effective is a good fret dressing
I do fret work and I would have to say it is one of the better investments one could do to a guitar. Deffinetly if the guitar is leveled first then re-crowned and re-dressed. As far as the material taken off, If it a recrowning nothing is taken off of the height of the fret. The fret is re-rounded and polished. As far as the leveling, it depends how far it is out of wack.
I do fret work and I would have to say it is one of the better investments one could do to a guitar. Deffinetly if the guitar is leveled first then re-crowned and re-dressed. As far as the material taken off, If it a recrowning nothing is taken off of the height of the fret. The fret is re-rounded and polished. As far as the leveling, it depends how far it is out of wack.
