How to Install Strat Cool Rails to Pro II?

[68Kustom]

Hi,

The Pro II Strat has polarities and coil directions 'backward' compared to other Fender SSS configurations. Below is the actual Pro II setup. How to wire in a Cool Rails bridge so that it preserves hum cancel with stock middle single coil--without splitting the Cool Rails?

zz0.mdqzu3q3czrzz

 

[jeremy]

the cool rails is humcancelling, adding a third coil will add hum. if you want the notch position to be humcancelling, you need to split the cool rails

 

[beaubrummels]

I think you need to flip ground and hot on the Duncan relative to Fender pickups also, or otherwise split to the coil that is RWRP to the Fender.

 

[68Kustom]

I think you need to flip ground and hot on the Duncan relative to Fender pickups also, or otherwise split to the coil that is RWRP to the Fender.

That's going to be a very tiny single coil to match the middle.

What about the stacked model? Is there a South up, clockwise RWRP version?