Kramer E.E. Pacer Imperial

muttznmongrelz

New member
Another Kramer...shocking I know!!! :)

- Vintage '88/89 Kramer E.E. Pro I Rosewood 22 Fret Neck w/Vintage Schaller Tuners & R2 Nut/String Retainer in Black
- Vintage '85/'86 Kramer Pacer Imperial 2 Piece Heavy Ass 6 lb Maple Body and Electronics
- Seymour Duncan Slash Signature APH-2N/Pre-2004 "Evenly Voiced Harmonics" Trembucker mounted in Black Metal HB Mounting Rings
- Vintage Original Floyd Rose in Black w/42mm Big Brass Block with Old School Screw In Posts

 
Last edited:
Re: Kramer E.E. Pacer Imperial

Can we get a pic of the green avatar guitar?




- Butala Custom Reverse Banana Neck ala George Lynch Kamikaze with Black Gotoh Tuning Pegs, Vintage R2 Nut & String Tree
- NOS Vintage Kramer PCI Seafoam Green Body
- Seymour Duncan's: '83 APS-1/Antiquity Neck/Custom Shop MJ RTM
- Vintage '86 Floyd Rose Original w/42mm Big Brass Block
- DiMarzio 500k Push:Pull Volume to Switchcraft DPDT to Switchcraft Cannon Jack
 
Last edited:
Re: Kramer E.E. Pacer Imperial

I'm calling dibs on the Iceman if you ever decide to sell it.

Duly noted. The Iceman neck and body were just meant to be together; best fit ever. It's a toss up between the Warmoth Strat and the USACG Iceman for my favorite guitar. Although the Iceman has a KILLER JB/Custom Custom A2 Hybrid Trembucker in the Bridge!!! ;)

Famn Damily Oct 2014




 
Last edited:
Re: Kramer E.E. Pacer Imperial

As this thread has pretty much turned into "My Current Gear" Thread...might as well make it complete!!! :lmao:

2013 Warmoth Strat




 
Re: Kramer E.E. Pacer Imperial

Just picked up an OFR from Trading Post...once that arrives...I will only need a neck humbucker and mounting rings and it'll be ready for assembly.
 
Re: Kramer E.E. Pacer Imperial

Parts have been acquired; got everything to complete her...waiting on the Floyd Screw In Posts and SD Slash Neck HB to arrive than I'll drop it off for assembly & set up in a week or so...


- Vintage '88/89 Kramer E.E. Pro I Rosewood 22 Fret Neck w/Vintage Schaller Tuners & R2 Nut/String Retainer in Black
- Vintage '85/'86 Kramer Pacer Imperial 2 Piece Heavy Ass 6 lb Maple Body and Electronics
- Seymour Duncan Slash Signature APH-2N/Pre-2004 "Evenly Voiced Harmonics" Trembucker mounted in Black Metal HB Mounting Rings
- Vintage Original Floyd Rose in Black w/42mm Big Brass Block with Old School Screw In Posts

 
Last edited:
Re: Kramer E.E. Pacer Imperial

That's gonna be sweet when it's done. I don't know if you have experience with the Slash neck but it is a killer neck pickup. Almost has a single-coil-ish type of vibe depending on the gain structure. Very cool pickup.

There's a few projects going on in this forum right now.
 
Re: Kramer E.E. Pacer Imperial

Thanks! Slash in the Neck/Eddie in the Bridge and a Heavy Maple Body w/Rosewood Neck...I've got high hopes for TONE. I haven't actually played a SD Slash Signature yet so I'm looking forward to hearing it when it's all together.
 
Re: Kramer E.E. Pacer Imperial

You'll love it. If it's too bright, use a 250K pot for the tone control with a .022uf cap or even .033uf. I had it wired in to my frankenstrat with no control and it was fine; alder body, maple/maple neck. It should be OK though.

I'm anxiously waiting for my Tele parts to get here so I can slap together an Esquire (started a thread about it already).
 
Back
Top