Lets see those pedal boards you are using right now.

[guitarSQUIRELL]

Post your PEDAL BOARD pics here.

 

[Rich_S]

Re: Lets see those pedal boards you are using right now.



Pitchblack, Fuzz Rite clone, BB PReamp, '74 RI Phase 90, CE-2, BF-2, DD-3, Multistomp (presently doing slapback duty). Voodoo PP2+ under the deck.

 

[PFDarkside]

Re: Lets see those pedal boards you are using right now.

Hey, it's wired Rich!

I dig the blue. Are those Lava Cables? Self soldered or purchased?

 

[Rich_S]

Re: Lets see those pedal boards you are using right now.

Those are Belden 9463, designed for Allen-Bradley's industrial automation networks, RIO and DH+. Out in industry, they just call it "blue hose". I used it as a joke, because it's been ubiquitous throughout my engineering career. Anybody in the automation business from about 1980 onward knows blue hose on sight. If you ever had a couple of pieces of equipment and you didn't know if they were going to talk, as long as they both had a blue hose connection, you knew things would be alright. Also, I get scrap lengths for free, and what's scrap in a panel shop or factory can make a LOT of 5" patch cables.

It's getting to be obsolete these days, finally being phased out and replaced with Ethernet. It's really overqualified as guitar cable; twisted pair in triple shielding, but it's basically indestructible and I smile at the inside joke whenever I look down.

 

[guitarSQUIRELL]

Re: Lets see those pedal boards you are using right now.

Those are Belden 9463, designed for Allen-Bradley's industrial automation networks, RIO and DH+. Out in industry, they just call it "blue hose". I used it as a joke, because it's been ubiquitous throughout my engineering career. Anybody in the automation business from about 1980 onward knows blue hose on sight. If you ever had a couple of pieces of equipment and you didn't know if they were going to talk, as long as they both had a blue hose connection, you knew things would be alright. Also, I get scrap lengths for free, and what's scrap in a panel shop or factory can make a LOT of 5" patch cables.

It's getting to be obsolete these days, finally being phased out and replaced with Ethernet. It's really overqualified as guitar cable; twisted pair in triple shielding, but it's basically indestructible and I smile at the inside joke whenever I look down.

That's what I was thinking that was just wasn't quite sure either. Nice setup by the way.

 

[Rich_S]

Re: Lets see those pedal boards you are using right now.

Not to mention the fact that I'm apparently the only person who still uses a pedalboard.

 

[Archer250]

Re: Lets see those pedal boards you are using right now.


Tuner > 808 clone > mid gain OD > RAT > EQ > Chorus > Delay

 

[PFDarkside]

Re: Lets see those pedal boards you are using right now.

Not to mention the fact that I'm apparently the only person who still uses a pedalboard.

I love that story.

Here's mine. I run a Wah and a flanger or Microvibe out front. (Need a bigger board! )

 

[guitarSQUIRELL]

Re: Lets see those pedal boards you are using right now.

Not to mention the fact that I'm apparently the only person who still uses a pedalboard.

I was beginning to wonder the same thing.....

 

[Archer250]

Re: Lets see those pedal boards you are using right now.

Not to mention the fact that I'm apparently the only person who still uses a pedalboard.

What do people use nowadays?

 

[guitarSQUIRELL]

Re: Lets see those pedal boards you are using right now.

What do people use nowadays?

Personally, I mainly use a modeling processor since they are somewhat cheaper (well, the one I have was anyway). I have a Fender Mustang Floor and a Digitech RP350. I started this thread to see what other guitarists alike had on a board to where I could start to build my own board in the future.

 

[Lazarus1140]

Re: Lets see those pedal boards you are using right now.

Last year's board:




A more recent iteration:

View attachment 64551


Even the carpet got replaced!

 

[PFDarkside]

Re: Lets see those pedal boards you are using right now.

Sweet Laz! I could dig on that board for days.

 

[Falloffthebonetone]

Re: Lets see those pedal boards you are using right now.

 

[Aceman]

Re: Lets see those pedal boards you are using right now.

80's metal setup….



Planet waves Tuner - Thank you Evan!
Original Proco Rat - in case i want to go with a different dirt through the clean channel
Washburn Flanger - Flanger in "Down Boys" or "Ain't Talkin' bout Love"
Marshal Clean/OD OD1/OD2 switch
Digitech Chorus factory set to Boss CH-1
Behringer Vintage Flanger - Van-Halenized in Orange/Black/White, set to vintage. No reason….just in case.
Visual Sound Garage Tone delay - set for tight slap back effect "Cold Blood" or Ain't Talkin' bout Love"
Boss RV-3 set for tight metallic delay - general use "Cum on feel the noise" etc…
Boss DD-3 set for long delay/repats - generally for solos

 

[Johnny the Kid]

Re: Lets see those pedal boards you are using right now.

I have a second expression pedal that controls the feedback on my delays.

 

[Securb]

Re: Lets see those pedal boards you are using right now.

Once again here you go.

 

[Rand-O-Monium]

Re: Lets see those pedal boards you are using right now.

Cool,Ace,was wondering what you were running w/the Marshall...

 

[Lazarus1140]

Re: Lets see those pedal boards you are using right now.

Once again here you go.

Good stuff, Bruce. I think you win the potentiometer count!

 

[guitarSQUIRELL]

Re: Lets see those pedal boards you are using right now.

I'd say he wins by a long shot. I would get lost in the knobs.