Lets see those pedal boards you are using right now.

[Riley65]

Re: Lets see those pedal boards you are using right now.

Guitar - Music Man JP6 with Piezo

Guitar input 1- Piezo Active pickup into a Radial Stage Bug("this is a must", passive and active signals don't mix!) and then into Mxr analog delay for acoustic side.

Guitar input 2 - Headrush for all other blended effects. .

Both Acoustic / Electric Effects go to Digitech Trio for Bass / Drums, Then to a Boss RC-30 Stereo for looping.


Mistake on my last post, This was built from cherry and walnut not mahogany.

 

[JMP/HBE]

Re: Lets see those pedal boards you are using right now.

 

[NoOnesFang13]

Re: Lets see those pedal boards you are using right now.

Redid my board today. Had to disassemble it when I moved.

Sent from my SM-G930V using Tapatalk

 

[The Dali]

Re: Lets see those pedal boards you are using right now.

First time trying to post a picture of my first custom build. I used Cherry and Mahogany so mistakes would be costly, But i think the risk paid off. I will post more pictures as i complete.

View attachment 104447View attachment 104448

I love it, but sadly you are not going to see it once you load it with pedals!


Sent from my iPhone using Tapatalk

 

[The Dali]

Re: Lets see those pedal boards you are using right now.

Sent from my iPhone using Tapatalk

 

[NegativeEase]

Re: Lets see those pedal boards you are using right now.

Sent from my iPhone using Tapatalk

This board is about as polar opposite of any of my pedal boards now or in the past -except one thing. -Organization.

I commend you on the layout and what looks to be a predictable and reliable setup.

Messy cables and power give me the creeps. Nice Job.

 

[Securb]

Re: Lets see those pedal boards you are using right now.

Here is the flavor I am trying out at practice tonight. Trying to downsize.

EDIT: Didn't even make it out the door before I remembered I need my Carbon Copy for RWTD, this board shall grow again.

 

[dr.barlo]

Re: Lets see those pedal boards you are using right now.



B

 

[Gtrjunior]

Re: Lets see those pedal boards you are using right now.

^^^I think your board is a just a bit too small for your needs. Lol

 

[dr.barlo]

Re: Lets see those pedal boards you are using right now.

Footswitches and loop pedals don't count.



B :banghead:

 

[dystrust]

Re: Lets see those pedal boards you are using right now.

No pedal board is ever done, so here we are once again.

Lead 12 pedalboard v2:

The updates to my Lead 12 board ended up driving this whole re-working. First of all I wanted both a Flanger and Chorus, but didn't have room for both. I also wanted to experiment with different delay types beyond the lo-fi digital delay offered by my DD-2. I'm not a TC Electronic fanboi by any means, but a TC Flashback & Dreamscape ended up working pretty well.

The board is a Holeyboard Amptop; power courtesy of a Visual Sound One Spot.
Signal chain is: Pitchblack -> Pickup Booster -> Phase 90 -> OD-9 -> Dreamscape -> Flashback (Dynamic ~300ms)

Pedalboard v6:

While testing out the TC Flashback on my Lead 12 board, I found that I REALLY like the dynamic delay setting. It's still punchy like the DD-2/DD-3, but it doesn't get in the way of my playing by muddying things up or getting too bright and spike-y. I went with a Flashback 2 here for the additional Tone Print slots in case I need a few 'presets' for things.

The board is a Holeyboard Evolution Wide; power courtesy of a Voodoo Lab Pedal Power Mondo.
Signal flow is set up to mimic a two-amp rig I had briefly in the mid 2000s.

Guitar -> EB Volume -> Wah -> EVH Phase 90 -> Loop-Master Clean/Dirty/Channel Switcher™ w/Combinable Loops & Tuner Out
Dirty: Tumnus -> UFO (fuzz / octave) -> Micro Flanger -> Flashback 2 (Dynamic ~300ms)
Clean: MIJ CS-3 -> GT-500 -> MIJ CE-2 -> Flint
Tuner: Korg Pitchblack Portable

When combined, the dirty loop is cascaded into the clean loop. The signal and switch outputs from the Loopmaster go to a junction box hidden under the left end of the riser.

Original NPBD here, while v2 is here, v3 is here, v4 is here, and v5 is here.

 

[dystrust]

Re: Lets see those pedal boards you are using right now.

It's really cool to have back-to-back posts in this thread.

Lead 12 pedalboard v3:

I was joking in the Sound Room about how I finally took pics and posted an update, and I literally found a new pedal the very next day. I was happy with the Maxon OD-9, but I really wanted it back on my pedal shelf so I can use it when recording with my other amps. The Pickup Booster OTOH was just too loud and fat to be a good fit with the Lead 12. The ParaDrive ended up working even better than I expected; OD -> Lead 12 yields a JCM800 type tone, Boost -> Lead 12 is more plexi-ish, while both cascaded is a great lead tone. With the other recent update I can't really think of anything else this board needs.

The board is a Holeyboard Amptop; power courtesy of a Visual Sound One Spot.
Signal chain is: Pitchblack -> Phase 90 -> ParaDrive -> Dreamscape -> Flashback (Dynamic ~300ms)

 

[Swampy]

[No message]

 

[Demanic]

These.

Sent from my Alcatel_5044C using Tapatalk

 

[zizyphus]

__PRESENT

 

[CapoFirstFret]

Because this stupid pedalboard is always changing....current jam

 

[Mincer]

Here was mine from a recent recording session:

 

[Gtrjunior]

Here was mine from a recent recording session:

So the Fractal is an all in one floor unit? No power amp needed?
I absolutely do not know how these things work.
About a month or 2 ago, I played through a friends Helix. It sounded ok. Mostly because his tones were not the tones I would probably program, but I see the potential.

 

[Mincer]

The Fractal gets plugged directly into a mixer. It models amps, cabs, microphones, effects, etc. So, live, you need a power amp (like the PowerStage 200) into a cab or, like I do, into in-ear monitors direct to the PA. This setup isn't for everyone, for sure- that visceral 'standing in front of the loud cab' thing is not there, but the tone the audience (or recording engineer) hears is glorious. Recording-wise, it is the best recorded tone I've ever had. So, that works for me.

 

[rbc]

Here's mine. I'm such an effects squirrel, it's just a bunch of velcro stuck to a board that I found around the house: