Lets see those pedal boards you are using right now.

I think I'm finally happy with all the sounds on my board:
52628686692_0a80df903f_b.jpg



Guitar -> Dunlop 535Q -> Fuzz Faceish pedal I built with hi/low tone controls -> Fulltone Deja Vibe -> Korg Pitchblack Custom Tuner -> Moore E-Lady -> JHS PG-13 Distortion -> Boss BD-2w -> Amp in

Amp send -> Xotic SP Compressor -> Seymour Duncan Deja Vu Delay -> Empress Tremolo -> Amp Return


Took me a long time to figure out that I like the sound of modulation after fuzz but before OD/Distortion . . . and compression after all gain and in the loop.
 
MrsLkIS5Q30gK-oTpqG3lUJn2BSU1pY1j6gLI44wATOO2ywKblcgJGGoKRV7xmuq9f_csAbhJhZgV4liy7Y62WJBfNeWbjEmvyNQGJA1gpPPjMEd42oxnBpDBH7b4M33SlnlrWqH7PTNeYnrb5RMFzy-CMGEk4bfrImQcqhUg2jYCpVdn2NcSDkqzFsyg-WWV9JHZYTCIHg5Zz-zh_8Rr05E8iGOlLFs260GHOt-s7jSDgfzfd6lSPE7N188FO5jY0Xk5yJgPBoo9hPzGRHI1caofYVk6GZygBMRijsa0zf5XyrJNlJrukeE8FARqcWyph61EuvdjQ0yaX7hy3J9ZFJdxTMGz6OBaApOjPkvxHNAPRyX33Ztdyhcpy3nEq_w89ID7c4dohA2Dj4x_n6A-kNXMDYAozTnvVkazEZVLqiXH71b1cmNc5bNq_q8GHSUTQKJ9KJ1oIOwaAUyNeuo5x9P1UjgKfIQv572guaIsicgI63BfQidIIYcJpI8Gfo78CJYT3C4wV4XLT8NRcfY_LwC5AydYTX0B3PYngkHSJunn2a3Dgd44mvcPpCmWbgVuudXCh-SMWZMdrT7whjIH4Cdx8eB67SyKuWcsd0v8ZEi0fl8ncWqyjq4MiYLa5r3jf0plSVXN4KcCfpvdi2Ah9AMP-R6EkMpeXtMy5-5eNP2RZeXMFuOaoK90OqzLyfR5GzDW8_H1-UgwxzczBv30L5fbcjsEn-U7suBERpEBtqQYovb2enwSycp-szLl3uJOmO68qodQyPIGj1yOaUxWIMxGSevuQldypXn-4R0BrZlYs7Jna1WDJR9A-5q3Z6sPy41hH0ay3ycLCFGtp0MvIF824mSNFOwOJgBNGngGo371rY9MrHbaGRlf7vkkp2ElPM0UbLCIj0iAHuonqtSYO3w6yZop7Km2mVb1dUcRdiznSIN=w1176-h770-no


Just put this together a few days ago. Getting to know the Dr. Z and the M-EQ Driver. The M-EQ is like magic or something. It just makes everything sound better.
 
The reverb is great but the thing goes from 0-Surf by 9 o'clock on the level knob. Room/Spring/Plate all sound realistic and it's certainly well built.
 
I think I'm finally happy with all the sounds on my board:




Guitar -> Dunlop 535Q -> Fuzz Faceish pedal I built with hi/low tone controls -> Fulltone Deja Vibe -> Korg Pitchblack Custom Tuner -> Moore E-Lady -> JHS PG-13 Distortion -> Boss BD-2w -> Amp in

Amp send -> Xotic SP Compressor -> Seymour Duncan Deja Vu Delay -> Empress Tremolo -> Amp Return


Took me a long time to figure out that I like the sound of modulation after fuzz but before OD/Distortion . . . and compression after all gain and in the loop.

What does the EXP pedal control?
 
Nice. But I like trolling Aceman with my minimalist setup. Literally a board.

Sent from my SM-A115A using Tapatalk

Ran a cheap dishwashing mat from Walmart and velcroed my pedals to it as a pedal board at Church for years. Worked like a charm because I didn't have to move it. Whatever works man lOL!
 
Ran a cheap dishwashing mat from Walmart and velcroed my pedals to it as a pedal board at Church for years. Worked like a charm because I didn't have to move it. Whatever works man lOL!
Fantastic idea! Spongy to provide a bit of cushion against the heavy footed. And guaranteed not to slide on the floor.

Sent from my SM-A115A using Tapatalk
 
Nice. But I like trolling Aceman with my minimalist setup. Literally a board.

Sent from my SM-A115A using Tapatalk

i have three boards setup right now, they are all just a board with velcro. no paint or nuffin. your rubber band method isnt sturdy enough for gigging, but for home use, it works
 
i have three boards setup right now, they are all just a board with velcro. no paint or nuffin. your rubber band method isnt sturdy enough for gigging, but for home use, it works
No doubt. Then I would be using duct tape.
But those aren't rubber bands. They're the long twist ties used on produce, like celery, kale or beets.

Sent from my SM-A115A using Tapatalk
 
Back
Top