Lets see those pedal boards you are using right now.
- Thread starter guitarSQUIRELL
- Start date
Masta' C
Well-known member
Functional simplicity for the win...I ain't judging ya!
Blille
New member
I finally spent some time with my small pedalboard.
First I added the studio compressor after the reverb in the loop. That way I can remove the compressor I have at the end of the chain in the stomp. I also added a raiser to connect the reverb more easily and hold to freeze more easily.
I also added the mini footswitch to change patches up and down.
The mini board covers the majority of my playing but I put it together thinking it could be modular. So I got a Nano + with a light OD, SP Comp, a Phasor, a Pilot to choose the snapshots and my JA Golden Boy. The Golden Boy is controlled via midi and the comp and OD are always on so I don’t need access to them. It’s all connected easily to the other board with 4 cables and powered with a gigrig isolator that connects to the CS6 in the other board. This additionally frees up slots, DSP and controllers in the Stomp that I can use for other stuff.
First I added the studio compressor after the reverb in the loop. That way I can remove the compressor I have at the end of the chain in the stomp. I also added a raiser to connect the reverb more easily and hold to freeze more easily.
I also added the mini footswitch to change patches up and down.
The mini board covers the majority of my playing but I put it together thinking it could be modular. So I got a Nano + with a light OD, SP Comp, a Phasor, a Pilot to choose the snapshots and my JA Golden Boy. The Golden Boy is controlled via midi and the comp and OD are always on so I don’t need access to them. It’s all connected easily to the other board with 4 cables and powered with a gigrig isolator that connects to the CS6 in the other board. This additionally frees up slots, DSP and controllers in the Stomp that I can use for other stuff.
v8stang289
New member
Newest iteration.
I'm waiting for another cable for the MXR A/B box, and also looking for another carbon copy to replace the Rogue delay as it colors/darkens the sound too much.
I'm waiting for another cable for the MXR A/B box, and also looking for another carbon copy to replace the Rogue delay as it colors/darkens the sound too much.
Blille
New member
Is this for two different amps and you have OD to analog delay on both or is everything chained together?
v8stang289
New member
3 different amps (2 of them have Delays in the effects loop)
Some pedals are at the beginning of the chain and feed all 3, some are after the switches and just feed their respective amp.
Blille
New member
Get it. The rogue is even darker than the CC or it’s because of the amp?
v8stang289
New member
The Rogue just has a dark sound, the CC is much more transparent. I've tried it on all my amps and its the same deal.
It doesn't sound bad, just changes the sound too much and i's very obvious when it's switched on
80's_Thrash_Metal
Slightly_Glazed_Believer
Revamped this the other night. Had to make room for my vocal pedal to fit on it.
We just booked the county fair in a few months..... Those poor people aren't going to know what hit them!
We just booked the county fair in a few months..... Those poor people aren't going to know what hit them!
Blille
New member
Revamped this the other night. Had to make room for my vocal pedal to fit on it.
We just booked the county fair in a few months..... Those poor people aren't going to know what hit them!
Nice. Did you just put the 805 back on the board?
80's_Thrash_Metal
Slightly_Glazed_Believer
Yes I did!
I was needing a separate OD to push 2 of my quieter guitars through a more mellow amp. So I added it back on board to just be the extra kick I'm the pants that I wanted. It's working out very well !
Blille
New member
Very cool. It’s a pretty flexible OD.
v8stang289
New member
Well, I ended up finding a good deal on a SD Vapor Trail to replace the Rogue delay instead of grabbing another Carbon Copy. It's a really cool pedal that sounds great. Only thing I dont like so far is that the LED for the "delay" knob is always on/flashing even when the pedal is off. Gonna have to get an inline switch or something to cut power because that bugs me.
v8stang289
New member
Yes.
I like it when I'm using the pedal, but I don't like that it always blinks when power is supplied since my board is always plugged in.
80's_Thrash_Metal
Slightly_Glazed_Believer
Revamped the home board today.
I lost the wah, the 805, added a looper, which I will run through the loop, and added a mini klon clone.
I also put my chorus pedal back on in case I need it some day...
I lost the wah, the 805, added a looper, which I will run through the loop, and added a mini klon clone.
I also put my chorus pedal back on in case I need it some day...
Ascension
New member
My board and rig at Church as of now. Boss CS 3 and Wampler Tuminus in the front of the amp and a Boss DD7 and Neunaber Seraphim into the loop, the amp is a 1991 Carvin X 50 B Hot Rod Mod head, I'm running a Blackstar 1/12 cab loaded with a old early 90's GT 75 miced with a SM 57 in a room off stage.
