need wiring help!

[jackjoseph_]

I just started to wire my first pickguard and i'm following the diagram i found on the duncan site. Its a strat. 2 humbuckers, 2 volume, 1 tone, 3 way. No coil splitting or anything. I'm really confused as to what I do in terms of connecting the pickups to the 3 way switch. The diagram shows a gibson switch. Thanks

 

[jackjoseph_]

Re: need wiring help!

I'm not sure what arms of the 3 way i use

 

[Funkfingers]

Re: need wiring help!

The schematic diagram that you have selected is for Gibson Flying Vee and Explorer guitars. The same circuit often appears on Hamer instruments.

For Stratocaster applications, you need to translate the Switchcraft toggle selector switch portion of the diagram to the modern Telecaster three-way lever switch format.

Hence, you require a three position CRL lever switch.

 

[jackjoseph_]

Re: need wiring help!

I have the fender 3 way switch. Im just not sure what arm of the switch im supposed to connect each wire too. thanks

 

[beaubrummels]

Re: need wiring help!

Try this

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=3ws_trans