Noiseless Neck P90 Needed

zozoe

New member
Good day all, & good health,, I'ma needing a Noiseless P90, & being that it's for my rarely used neck position, it may not seem like such a priority for quality, but perhaps all the more for it to be cool when it is used?!? In the bridge is a stock wind Fralin noiseless 90, & a beast of a Dimarzio SDS1 in the middle, & a blender setup,,, So, w/o breaking the piggy bank like I did for the bridge pup, what's worth looking at? The first thing that catches my eye is a Kent Armstrong for around $60,, but everything else seems to be pushing that $100 mark... Hum-free, neck, P90 ,,, Armstrong's any good?
Thanks in advance for the help~
Be safe, stay well Click image for larger version  Name:	Screenshot_20200601-024536_Gallery.jpg Views:	0 Size:	34.5 KB ID:	6055326
 
Last edited:
If money is an object, The GFS Dream 90 is a nice pup. I've got a pair in an Iceman, and it's a keeper.
 
dream 90 is bucker size and not noiseless right?

not sure about noiseless p90s, dont have much experience with them other than fralin and duncan
 
I have a pair of the noiseless Kent Armstrongs in a Hagstrom and they're pretty darn good.
A tad more polite than regular P90s; they still bite but with a little less grunt in the low mids.
Still, they're fat & hum-free and definitely still have the singlecoil character.

In bridge position I miss the extra bit of raunch but for the neck IMO these are a great option.
 
Thnx,, it's not an Uber high output pup & the specs dictate? The Bridge is a Custom wind Fralin,, about 9k..
 
GFS has them (never tried them but I have their goldfoil and lipstick pickups and they're ok). So does Dimarzio. Virtual P-90 comes to mind.
7c9e73dcb8f857066c09b628943c9586.jpg
 
Thnx,, it's not an Uber high output pup & the specs dictate? The Bridge is a Custom wind Fralin,, about 9k..

No, vintage output. Lighter lows make their output seem perhaps a tad lower than standard P90s.
The DCR is deceptively high because these have two coils in series for hum canceling.*
Ought to balance just fine with a 9K bridge P90.

*That means you could also use a switch for series/parallel wiring if you wanted to have a cleaner, lower output option on tap too.
 
Thanks folks, that now understood 19.1k makes more sense now, & is nothing to seek shelter over?!
Stay safe & be well~
 
I don't want or need hot & mean,, just something with a cool clean personality, & that will perhaps split well with my bridge & middle.
Thnx all~
 
Back
Top