My current Strat setup is a Zexcoil Throaty Bucker in the neck and SD Custom 5 in the bridge. I am using a 3 way blade switch and have the Zexcoil spitting off the single volume knob and the Custom is spitting off a mini toggle. The problem I have is when the three way blade is in the middle position, the pickups are out of phase. The same goes when the pickups are spilt. To correct this would I just need to reverse which coil gets split on the Custom? Instead of red/white to split, change the whole Custom wiring to: Black/Green to split, red to hot and white to ground? Or will I need to do something else?
Out of Phase with Zexcoil
- Thread starter JoePeeper
- Start date
