Garystratos201
New member
I have a question; if your not playing in stereo can you plug in one input and plug cabinets in the left and Rt speaker outputs.
Power Stage 700
- Thread starter Garystratos201
- Start date
Riley
New Products Specialist
Re: Power Stage 700
Well, I'd say that clean headroom is the main advantage - you don't need to use the full available power, but it's there if you want it. Also, keep in mind that it's putting out 700 watts when you run it at 4 ohms, but at 16 ohms you'd be looking at more like 175 watts per channel.
I'd put PS700 in the same category as something like the Mesa SimulClass 2:90 or the Fryette Two/Ninety/Two. Most people probably don't need the full 90 watts of tube power per channel either, but running one of those amps at lower volumes will perform differently than running a lower wattage power amp cranked up higher.
I've used PowerStage 700 to amplify an AxeFX through a 4x12 cabinet for smaller gigs, and also as part of a wet/dry/wet rig at my rehearsal space, just for fun. Works well in both scenarios.
Well, I'd say that clean headroom is the main advantage - you don't need to use the full available power, but it's there if you want it. Also, keep in mind that it's putting out 700 watts when you run it at 4 ohms, but at 16 ohms you'd be looking at more like 175 watts per channel.
I'd put PS700 in the same category as something like the Mesa SimulClass 2:90 or the Fryette Two/Ninety/Two. Most people probably don't need the full 90 watts of tube power per channel either, but running one of those amps at lower volumes will perform differently than running a lower wattage power amp cranked up higher.
I've used PowerStage 700 to amplify an AxeFX through a 4x12 cabinet for smaller gigs, and also as part of a wet/dry/wet rig at my rehearsal space, just for fun. Works well in both scenarios.
Garystratos201
New member
Re: Power Stage 700
Another question; can the Power Stage 700 handle two 8 ohms 4x12 cabinets on the left channel and two 8 ohm 4x12 cabinets on the right ?
Another question; can the Power Stage 700 handle two 8 ohms 4x12 cabinets on the left channel and two 8 ohm 4x12 cabinets on the right ?
Garystratos201
New member
Re: Power Stage 700
Thanks Jeremy i'm using a Two Y Splitter cables on on the left and right channels.
Thanks Jeremy i'm using a Two Y Splitter cables on on the left and right channels.
